X-Git-Url: https://git.sev.monster/~sev/dotfiles.git/blobdiff_plain/d569f3f7ac829693addfdc8ed656e70d80d7d467..8876bf624448f3b8b6a2fabe6df726489987038b:/base/.zprofile?ds=sidebyside diff --git a/base/.zprofile b/base/.zprofile index acdd191..1abd5b5 100644 --- a/base/.zprofile +++ b/base/.zprofile @@ -1,347 +1,331 @@ -### imports -source ~/bin/.check-busybox +# NOTE: +# our .zprofile is expensive, so we keep track of what has been run already, +# and only set up what is necessary. additionally, we want to ensure that our +# environment is set up as early as possible, so we also source .zprofile in +# .zshenv for new non-login shells. +# +# these issues are handled by using these methods: +# * the parent shell that starts the user's session after logging in to some +# graphical environments may not be a login shell—due to misconfiguration +# or otherwise—which means .zprofile is not ran and the environment is not +# properly configured for any child processes. +# * some desktop environments/graphical terminal emulators will start new +# terminal windows with login shells, which runs .zprofile every time and +# leads to noticably slow startup times. +# * switching users without wiping the environment will result in paths and +# variables intended for the old user being used for the new user. while +# this may be considered an edge-case that should not be supported, there +# are legitimate reasons to want to do this, and in any case the shell +# should not choke or cause unexpected problems should it happen anyway. -### exports -## reset PATH to prevent /etc/zprofile from changing it -# some distros put non-interactive PATH in env and interactive PATH in profile; -# we want to make sure to always use ours regardless -if [[ -v _sev_backup_path ]] { - path=("${_backup_path[@]}" "${path[@]}") - export PATH - unset _sev_backup_path +### lang +export CHARSET=UTF-8 +export LANG=en_US.UTF-8 +export LC_CTYPE=$LANG +### path +# NOTE: we utilize the fact that unique arrays keep the first occurrence and +# remove any further occurences to capture elements from the old PATH +# that we did not anticipate and shift them to the front, since they are +# probably important to the system +if [[ ! -v _sev_setup_path || -o login ]] { + typeset -U path fpath + # add as many generic paths as possible to keep the order we want + # NOTE: /usr/{local,pkg,games} are unix/bsdisms + syspath=("$path[@]") + path=({~,~/.local,,/usr,/opt,/usr/local,/usr/pkg}/sbin + {~,~/.local,,/usr,/opt,/usr/local,/usr/pkg}/bin + /usr/X11R{7,6}/bin /usr/games) + ((len=$#path)) + path=("$path[@]" "$syspath[@]") + # remove nonexistent and duplicate paths + for (( i = 1; i <= $#path; i++ )) { + if [[ ! -e $path[$i] ]] { + path[$i]=() + ((i <= len)) && ((len--)) + ((i--)) + continue + } + } + # shift valid system paths to the front if there are any left + ((len > 0 && len < $#path)) && path=("${(@)path[len + 1, -1]}" "${(@)path[1, len]}") + unset syspath len i j + # include our zsh dir in fpath. unlike above, we always prefer our paths + fpath=(${ZDOTDIR:-~/.zsh}/functions/{*,Completions/*}(N) "$fpath[@]") + # FPATH is not exported by default + export FPATH + typeset +U path fpath + export _sev_setup_path= } -## common -export EDITOR=vim -export PAGER=less -## grep -# XXX: deprecated in GNU -export GREP_OPTIONS=--color=auto -## histfile -export HISTFILE=~/.histfile -export HISTSIZE=1000 -export SAVEHIST=1000 -## python -export PYTHONSTARTUP=~/.pythonrc -## perl -[[ -v commands[perl] ]] && eval $(perl -I $XDG_DATA_HOME/perl5/lib/perl5 -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null) -### ssh agents -# NOTE: preferred order of agents to check: okcagent, gnupg, openssh -# first block takes care of okcagent and openssh, second handles gnupg -if [[ ! -v SSH_AUTH_SOCK && ( -v commands[okc-ssh-agent] || - ( -v commands[ssh-agent] && ! -v commands[gpg] ) ) ]] { - okc=${commands[okc-ssh-agent]:+okc-} - agentfile=~/tmp/${okc}ssh-agent-exports - typeset sock= - typeset -i pid= - if [[ -f "$agentfile" ]] { - IFS=$'\0' read -r sock pid <"$agentfile" +### temp +# NOTE: it's intentional to separate POSIX tmp for each session (spec says +# programs should not expect data there to be long-lived) and to keep the +# same runtime dir and not create a new one if a new login shell is +# spawned, since the XDG spec calls for the same dir to be utilized for +# each "session". +if [[ ! -v _sev_setup_tmp ]] { + t=${TMPDIR:-${TEMP:-${TMP:-/tmp}}}/.home-$LOGNAME + h=~/tmp + [[ ! -e $t ]] && mkdir -pm700 $t 2>/dev/null + if [[ ! -d $t ]] { + [[ -o interactive ]] && + print -P "%F{red}!!! Can't create temp dir $t%f" + # fallback bare directories + [[ -h $h ]] && unlink $h 2>/dev/null + [[ ! -e $h ]] && mkdir -m700 $h 2>/dev/null + } + # [re-]create link to our tmp + [[ -h $h || ! -e $h ]] && ln -sfn $t $h 2>/dev/null + # finally create our subdir for this session + export _sev_tmp=$h/.session.$$ + # ensure dir doesn't exist. if there is already something there it is + # likely a stale directory or something is very broken—assume the former. + # the user could also want dirs recreated by unsetting the var. + if [[ -h $_sev_tmp ]] { + unlink $_sev_tmp 2>/dev/null + } elif [[ -e $_sev_tmp ]] { + rm -rf $_sev_tmp 2>/dev/null } - if [[ -S "$sock" && $pid -gt 0 ]] && kill -0 $pid; then - echo "Reusing ${okc+okc-ssh-}agent pid $pid" - export SSH_AUTH_SOCK="$sock" - export SSH_AGENT_PID=$pid - else - # TODO: ensure ssh-agent path looks legit - # to avoid unsafe eval? - eval `${okc}ssh-agent` - echo -n "$SSH_AUTH_SOCK"$'\0'$SSH_AGENT_PID >!$agentfile - fi - unset okc agentfile sock pid -} elif [[ -v commands[gpg] && ! -S $_GNUPG_SOCK_DEST && \ - ( ! -v SSH_AUTH_SOCK || -v DISPLAY ) ]] { - export GPG_TTY=$(tty) - export PINENTRY_USER_DATA=USE_TTY=$((!${+DISPLAY})) - gpg-connect-agent UPDATESTARTUPTTY /BYE >/dev/null 2>&1 - [[ ! -v SSH_AUTH_SOCK ]] && \ - export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) + mkdir -m700 $_sev_tmp 2>/dev/null + export TMPDIR=$_sev_tmp TEMP=$_sev_tmp TMP=$_sev_tmp + unset t h + export _sev_setup_tmp= } -### gpg socket -if [[ -v _GNUPG_SOCK_SRC && -v _GNUPG_SOCK_DEST && -S $_GNUPG_SOCK_DEST ]] { - unlink $_GNUPG_SOCK_SRC >/dev/null 2>&1 - mv $_GNUPG_SOCK_DEST $_GNUPG_SOCK_SRC >/dev/null -} +### xdg +if [[ ! -v _sev_setup_xdg ]] { + # merge with any existing dirs and remove duplicates using unique arrays + # NOTE: include and then remove CONFIG_HOME and DATA_HOME to ensure they + # are not present in the array if it was added before we got to it + typeset -UT XDG_CONFIG_DIRS xdg_config_dirs + export XDG_CONFIG_HOME=~/etc + mkdir -p $XDG_CONFIG_HOME + xdg_config_dirs=($XDG_CONFIG_HOME ~/.config + {/opt,/usr/local,/usr/pkg,}/etc/xdg + "${XDG_CONFIG_DIRS:+${xdg_config_dirs[@]}}") + export XDG_CONFIG_DIRS=${XDG_CONFIG_DIRS#$XDG_CONFIG_HOME} -### options -setopt NO_BEEP NO_CLOBBER -## cd -setopt AUTO_CD CDABLE_VARS -## completion -setopt GLOB_COMPLETE -## line -setopt EXTENDED_GLOB GLOB_DOTS MARK_DIRS NOMATCH NUMERIC_GLOB_SORT -## prompt -setopt PROMPT_SUBST -## jobs -setopt AUTO_CONTINUE -## history -setopt NO_HIST_SAVE_BY_COPY HIST_IGNORE_DUPS SHARE_HISTORY + typeset -UT XDG_DATA_DIRS xdg_data_dirs + export XDG_DATA_HOME=~/share + mkdir -p $XDG_DATA_HOME + xdg_data_dirs=($XDG_DATA_HOME ~/.local/share + /{opt,usr/local,usr/pkg,usr}/share + "${XDG_DATA_DIRS:+${xdg_data_dirs[@]}}") + export XDG_DATA_DIRS=${XDG_DATA_DIRS#$XDG_DATA_HOME} -### keys -# TODO: investigate "^[[200~" bracketed-paste -bindkey -v -KEYTIMEOUT=10 -## populate key array -if (( $#terminfo == 0 )) { - # terminfo is not set or empty - function find_keymap { - for f in ${ZDOTDIR:-$HOME}/.zkbd/${TERM}{-${DISPLAY:-${VENDOR}-${OSTYPE}},} - [[ -f $f ]] && keymap=$f && break - } - find_keymap - if [[ -z $keymap ]] { - if read -q "?Can't read terminfo. Add new zkbd keymap? [y/N]"; then - echo - autoload -Uz zkbd && zkbd - unfunction zkbd - find_keymap + export XDG_STATE_HOME=~/var/lib + mkdir -p $XDG_STATE_HOME + + # use our custom tmp for cache and runtime + export XDG_CACHE_HOME=$_sev_tmp/.xdg.cache + export XDG_RUNTIME_DIR=$_sev_tmp/.xdg.runtime + # create xdg tmp dirs + for x in $XDG_CACHE_HOME $XDG_RUNTIME_DIR; do + # same as in temp creation, ensure it doesn't exist + if [[ -h $x ]]; then + unlink $x 2>/dev/null + elif [[ -e $x ]]; then + rm -rf $x 2>/dev/null fi - echo - } - if [[ -n $keymap ]] { - source $keymap - } else { - echo "Failed to source file $keymap" >&2 - } - unfunction find_keymap; unset keymap -} else { - # activate application mode for zle so terminfo keys work - # don't do this for zkbd since application mode shouldn't have ben enabled - if [[ -v terminfo[smkx] && -v terminfo[rmkx] ]] { - autoload -Uz add-zle-hook-widget - function _enter-application-mode { echoti smkx } - add-zle-hook-widget line-init _enter-application-mode - function _exit-application-mode { echoti rmkx } - add-zle-hook-widget line-finish _exit-application-mode - trap _exit-application-mode EXIT - } - # match zkbd hash as best we can to terminfo - typeset -gA key - key[F1]=$terminfo[kf1] - key[F2]=$terminfo[kf2] - key[F3]=$terminfo[kf3] - key[F4]=$terminfo[kf4] - key[F5]=$terminfo[kf5] - key[F6]=$terminfo[kf6] - key[F7]=$terminfo[kf7] - key[F8]=$terminfo[kf8] - key[F9]=$terminfo[kf9] - key[F10]=$terminfo[kf10] - key[F11]=$terminfo[kf11] - key[F12]=$terminfo[kf12] - key[Backspace]=$terminfo[kbs] - key[Insert]=$terminfo[kich1] - key[Home]=$terminfo[khome] - key[PageUp]=$terminfo[kpp] - key[Delete]=$terminfo[kdch1] - key[End]=$terminfo[kend] - key[PageDown]=$terminfo[knp] - key[Up]=$terminfo[kcuu1] - key[Down]=$terminfo[kcud1] - key[Left]=$terminfo[kcub1] - key[Right]=$terminfo[kcuf1] - #key[Menu]=$terminfo[] #TODO: not in termcap? + # XXX: cache does not have to be 700 according to spec + mkdir -m700 $x 2>/dev/null + done + + # source user dirs after other vars + [[ -e $XDG_CONFIG_HOME/user-dirs.dirs ]] && + emulate sh -c "source $XDG_CONFIG_HOME/user-dirs.dirs" + export _sev_setup_xdg= } -## bind keys in both viins and vicmd modes -function multibind { - local k=$key[$1] - if [[ -n $k ]] { - bindkey -- $k $2 - if [[ -v 3 ]] { - # - will use same command as viins - bindkey -a -- $k ${3:/-/$2} - } +### gpg + ssh + forwarding +# NOTE: while ssh manages its auth sock in its protocol when ForwardSsh is +# enabled, GPG must be forwarded manually over Unix socket. to support +# this, we forward the restricted gpg-agent extra socket to the remote +# host with a RemoteForward rule in ~/.ssh/config that uses the +# _GNUPG_SOCK_* env vars. to avoid conflicts with other ssh sessions +# where the same user is connecting to the same host from different +# machines, gpg in each environment should utilize its own forwarded +# socket, rather than replace the sockets in GNUPGHOME which will be +# overridden on the next connection. previously, you could provide a path +# to the agent socket in GPG_AGENT_INFO, but that was deprecated in GPG +# v2.1. instead, we must clone GNUPGHOME with links and replace the agent +# sockets there with the forwarded one. +# NOTE: since Unix sockets are not supported under Windows, this will not work +# under msys, cygwin, mingw, etc., but may work under wsl2. +# HACK: without SendEnv, which is disabled by default in most sshd configs, +# there is no foolproof way to prevent race conditions via filename +# collisions or to pass the desired forward path to the remote host +# environment. we just have to guess the path we choose is good on the +# desination, and assume the newest matching socket is the correct one +# after connecting. in theory, we could occlude the ssh binary on PATH +# with an alias or script that would allow us to communicate with the +# remote host before opening a shell, so that we can have the host +# communicate back to the client where it wants a socket created or ask +# the host if the path the client wants to use is writable. however, this +# would open up too many edge cases where it wouldn't work or be clunky +# (e.g. asking for password twice) to make it worth it. +if [[ ! -v _sev_setup_agents ]] { + export GNUPGHOME=~/etc/gnupg + + function _socketpath { + # dirs are percent-encoded: https://stackoverflow.com/a/64312099 + echo ${1//(#b)%([[:xdigit:]](#c2))/${(#):-0x$match[1]}} } -} -multibind Backspace backward-delete-char vi-backward-char -multibind Insert overwrite-mode vi-insert -multibind Home beginning-of-line - -multibind PageUp up-line-or-history - -multibind Delete delete-char vi-delete-char -multibind End end-of-line - -multibind PageDown down-line-or-history - -multibind Left backward-char vi-backward-char -multibind Right forward-char vi-forward-char -## history search -autoload -Uz up-line-or-beginning-search down-line-or-beginning-search -zle -N up-line-or-beginning-search -multibind Up up-line-or-beginning-search - -zle -N down-line-or-beginning-search -multibind Down down-line-or-beginning-search - -unfunction multibind -### aliases -alias h="history -25" -alias j="jobs -l" -alias l="ls -AF" -alias p="${PAGER:-more}" # TODO: make sure more is there or use safe default -alias e="${EDITOR:-vi}" # TODO: make sure vi is there or use safe default -if [[ "$OSTYPE" =~ '^(free|net)bsd' ]] { - alias ll="ls -lAFho" -} else { - alias ll="ls -lAFh" -} -alias se=sudoedit -## ps -local p= -if which pstree >/dev/null 2>&1 && ! check-busybox pstree; then - # use pstree, but NOT busybox pstree because it kinda sucks - p="pstree -wg3" -elif [[ "$OSTYPE" =~ '^freebsd' ]]; then - p="ps -aSdfxwwouser=USR -ogroup=GRP -opid,nice=NI \ - -o%cpu,%mem,tty,stat,start=START -oetime,command" -elif check-busybox ps; then - # busybox compatible - p="ps -eouser='USR ' -ogroup='GRP ' \ - -opid=' PID' -onice=' NI' -ovsz=' MEM' \ - -otty,stat,etime,comm" -else - # XXX: untested, posix - # TODO: support gnu ps - p="ps -eouser=USR -ogroup=GRP -opid,nice=NI \ - -opcpu=CPU -ovsz=MEM -otty,stat,etime,comm" -fi -if [[ "$(basename "$PAGER")" = "less" ]] { - p="$p | less -SE" -} else { - p="$p | \"${PAGER:-more}\"" -} -alias pa="$p" -alias spa="sudo $p" -unset p -## py venv -alias va="source bin/activate" -alias vd="deactivate" -## be paranoid -alias cp='cp -ip' -alias mv='mv -i' -if [[ "$OSTYPE" =~ '^freebsd' ]] { - # don't confirm if only a few files are deleted - alias rm='rm -I' -} else { - # TODO: similar behavior for non-freebsd, or impliment in zsh - alias rm='rm -i' -} -## go up directories -function up { - cd $(printf '../%.0s' {1..${1:-1}}) -} + ## gpg forwarding + if [[ ! -v _sev_gpg_forwarded && -v commands[gpg] ]] { + export _GNUPG_SOCK_DEST_BASE=/tmp/.gpg-agent-forward + export _GNUPG_SOCK_DEST_EXT=$(date +%s).$RANDOM + export _GNUPG_SOCK_DEST=$_GNUPG_SOCK_DEST_BASE.$_GNUPG_SOCK_DEST_EXT + export _sev_gpg_forward_dir=${GNUPGHOME:-~/.gnupg}/.ssh_forward + # clean up forward dirs if its session is dead or we ask for it + if [[ -d $_sev_gpg_forward_dir ]] { + find $_sev_gpg_forward_dir -type d -mindepth 1 -maxdepth 1 | + while read -r x; do + # NOTE: the only way we can get here is if we have not been + # forwarded before or if the user asks for it. if our own + # pid already has a dir, it is most likely stale, or + # something is very broken—assume the former. + p=$(basename $x) + if [[ -v _sev_gpg_forward_clean || $$ == $p ]] || + ! kill -0 $p 2>/dev/null; then + find $x -mindepth 1 -maxdepth 1 | while read -r y; do + unlink $y + done + rmdir $x + fi + done + unset x p y + } -### hooks -autoload -Uz add-zsh-hook -_sev_exectime= -function sev_precmd { - # change terminal title - # TODO: update and send BEL when job status changes - print -Pn "\e]2;%(1j,%j,)%#${SSH_CLIENT+$USER@$HOST:}%~\e\\" - # bell if exec takes 5s - if (( SECONDS - _sev_exectime >= 5 )) print "\a" - # we could update vcs_info here, but let prompt take care of it - # if it doesn't use vcs, it can be ignored safely -} -add-zsh-hook precmd sev_precmd -function sev_preexec { - # change terminal title to show command - print -Pnf "\e]2;%s\e\\" "%#${SSH_CLIENT+$USER@$HOST:}$1" - # save last exec time for bell - # XXX: does not run for blank cmdline - _sev_exectime=$SECONDS -} -add-zsh-hook preexec sev_preexec -function sev_chpwd { - # echo dir on cwd change - ls -AF -} -add-zsh-hook chpwd sev_chpwd + # find our forwarded socket + s=($_GNUPG_SOCK_DEST_BASE*(N=oc[1])) + if [[ -n $s && -v SSH_CLIENT ]] { + # create new forward dir + export _sev_gpg_forwarded= + mkdir -pm700 $_sev_gpg_forward_dir + h=$_sev_gpg_forward_dir/$$ + mkdir -pm700 $h + # XXX: is it safe to link scdaemon socket? can its name be changed? + for x in S.scdaemon gpg.conf gpg-agent.conf sshcontrol \ + pubring.kbx trustdb.gpg private-keys-v1.d crls.d; do + ln -s ${GNUPGHOME:-~/.gnupg}/$x $h + done + export GNUPGHOME=$h + unset h + for x in $(gpgconf --list-dirs | grep 'agent-.*-\?socket:'); do + x=$(_socketpath ${x/#agent-*socket:}) + if [[ ! -v orig ]] { + # move forwarded socket to first valid agent socket path + # XXX: if tmp is on different filesystem this may not work + mv $s $x + orig=$x + } else { + # make links to forwarded socket for any others + ln -s $orig $x + } + done + unset x orig + } + unset s -### system-specific configs and aliases -case "$OSTYPE"; in - freebsd*) - # colors - export CLICOLOR= - export LS_COLORS='di=34:ln=35:so=32:pi=33:ex=31:bd=46;34:cd=43;34:su=41;30:sg=46;30:tw=42;30:ow=43;30' + # what we will forward if we start a new ssh connection + # NOTE: do this after setting up GNUPGHOME to pick up new socket path; + # if already connected over SSH, extra should be the remote one + export _GNUPG_SOCK_SRC=$(_socketpath \ + $(gpgconf --list-dirs agent-extra-socket)) + } else { + # required for RemoteForward to not error out if the vars are unset + [[ ! -v _GNUPG_SOCK_SRC ]] && export _GNUPG_SOCK_SRC=/nonexistent + [[ ! -v _GNUPG_SOCK_DEST ]] && export _GNUPG_SOCK_DEST=/nonexistent + } - ## sound - function s { sysctl hw.snd.default_unit${1:+\=$1} } - alias vol mixer + ## gpg agent + if [[ -v commands[gpg-connect-agent] ]] { + [[ -o interactive ]] && print -nP '%F{blue}>>>%f GPG agent: %F{green}' + gpg-connect-agent /bye >/dev/null 2>&1 + if [[ $? -ne 0 ]] { + [[ -o interactive ]] && + print -P '%F{red}Error communicating with GPG agent%f' + } elif [[ ! -v _sev_gpg_forward && ! -v GPG_TTY && + ( -o interactive || -v DISPLAY ) ]] { + # if we aren't forwarded, set up tty if it isn't and we're + # in an interactive session + export GPG_TTY=$(tty) + export PINENTRY_USER_DATA=USE_TTY=$((!${+DISPLAY})) + gpg-connect-agent UPDATESTARTUPTTY /bye >/dev/null 2>&1 + [[ -o interactive ]] && + print -P "Updated TTY%f" + } else { + [[ -o interactive ]] && + print -P 'Ready%f' + } + } - ## install port dependencies from pkg (like pkgsrc `bmake bin-install') - # XXX: should probably use package-depends where possible, breaks when - # port name is different to package name - # (eg. graphics/sdl20 == sdl2, devel/glib20 == glib2, etc) - function portpkg { - case "$1" { - build|run) - sudo pkg install -AU $(make ${1}-depends-list | - sed 's_/usr/ports/_ _' | tr -d '\n') - ;; - *) echo "Usage: \`portpkg ' in a port directory" - return 1;; + ## ssh agent + # NOTE: preferred order of agents to check: okcagent, gnupg, openssh + # first block takes care of okcagent and openssh, second gnupg + [[ -o interactive ]] && print -nP '%F{blue}>>>%f SSH: %F{green}' + if [[ ! -v SSH_AUTH_SOCK && ( -v commands[okc-ssh-agent] || + ( -v commands[ssh-agent] && ! -v commands[gpg] ) ) ]] { + okc=${commands[okc-ssh-agent]:+okc-} + agentfile=~/tmp/${okc}ssh-agent-exports + typeset sock= + typeset -i pid= + if [[ -f $agentfile ]] { + IFS=$'\0' read -r sock pid <$agentfile + } + if [[ -S $sock && $pid > 0 ]] && kill -0 $pid; then + [[ -o interactive ]] && print -P "Reusing agent PID $pid%f" + export SSH_AUTH_SOCK=$sock + export SSH_AGENT_PID=$pid + else + e=${okc}ssh-agent + # TODO: ensure ssh-agent path looks legit to avoid unsafe eval? + # XXX: doesn't appear to be any other way to handle redirection. + # because eval needs to write to current scope environment + # subshells can't be used to capture output and print. + if [[ -o interactive ]] { + eval `$e` + print -nP '%f' + } else { + eval `$e` >/dev/null 2>&1 } - };; - netbsd) - ## sound - function s { - if [[ -z "$1" ]] { - ll /dev/mixer /dev/sound /dev/audio - return + echo -n $SSH_AUTH_SOCK$'\0'$SSH_AGENT_PID >!$agentfile + fi + unset okc agentfile sock pid + } elif [[ ! -v SSH_AUTH_SOCK && -v commands[gpg] ]] { + # since gpg agent was started above, we just have to export and notify + if [[ -o interactive ]] { + if [[ -v _sev_gpg_forwarded ]] { + echo 'Remote GPG agent' + } else { + gpg-connect-agent /subst /serverpid \ + '/echo GPG agent PID ${get serverpid}' /bye } - for x in mixer sound audio; do - ln -sf /dev/$x"$1" /dev/$x - done + print -nP '%f' } - function vol { - if [[ -z "$1" ]] { - for x in $(mixerctl -a | grep 'outputs\.master'); do - echo $x - done - return - } - mixerctl -w outputs.master"$2"="$1" - };; - *) - ## sound - # TODO: test alsa/oss/sndio/portaudio/pulse in order of importance - function s {} - function vol {} -esac + export SSH_AUTH_SOCK=$(_socketpath \ + $(gpgconf --list-dirs agent-ssh-socket)) + } elif [[ -v SSH_AUTH_SOCK ]] { + [[ -o interactive ]] && print -P 'Preconfigured agent%f' + } else { + [[ -o interactive ]] && print -P '%F{red}No agent available%f' + } -### modules & styles -## vcs -zstyle ':vcs_info:*' enable git -#zstyle ':vcs_info:git*' check-for-changes true #too slow -zstyle ':vcs_info:git*:dotfiles' check-for-changes true -zstyle ':vcs_info:git*' check-for-staged-changes true -autoload -Uz vcs_info + ## cleanup + unfunction _socketpath -## compinit -zstyle ':completion:*' auto-description '[arg] %d' -zstyle ':completion:*' expand suffix -zstyle ':completion:*' format '# %d' -zstyle ':completion:*' group-name '' -zstyle ':completion:*' ignore-parents parent -zstyle ':completion:*' insert-unambiguous false -zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS} -zstyle ':completion:*' list-prompt '%B%i%b' -zstyle ':completion:*' list-suffixes true -zstyle ':completion:*' matcher-list '' 'm:{[:lower:]}={[:upper:]}' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} r:|[._-]=* r:|=*' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*' -zstyle ':completion:*' menu select=1 -zstyle ':completion:*' original false -zstyle ':completion:*' select-prompt '%B%l%b' -zstyle ':completion:*' verbose true -autoload -Uz compinit && compinit + export _sev_setup_agents= +} -## prompt -# do this last so prompt can potentially override other settings -autoload -Uz promptinit && promptinit -prompt arrows +## perl local lib +# TODO: debounce this +[[ -v commands[perl] && -d $XDG_DATA_HOME/perl5/lib/perl5 ]] && + eval $(perl -I$XDG_DATA_HOME/perl5/lib/perl5 + -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null) ### load site-specific if [[ -f ~/.zprofile.local ]] { source ~/.zprofile.local } -### unset imports -unfunction check-busybox - -# vim: set et sts=4 sw=4 ts=8 tw=79 : +# vim: et sts=4 sw=4 ts=8 tw=79