X-Git-Url: https://git.sev.monster/~sev/dotfiles.git/blobdiff_plain/c3608beb1b6da54f2e7b489571b750f582338f9f..e6e7ad69b69cc308652bbf7cc30c851b35933dc4:/base/.zprofile

diff --git a/base/.zprofile b/base/.zprofile
index 7a7fc10..2a26dbb 100644
--- a/base/.zprofile
+++ b/base/.zprofile
@@ -1,28 +1,392 @@
-### exports
-## reset PATH to prevent /etc/zprofile from changing it
-# some distros put non-interactive PATH in env and interactive PATH in profile;
-# we want to make sure to always use ours regardless
-if [[ -v _backup_path ]] {
-    path=("${_backup_path[@]}" "${path[@]}")
-    export PATH
-    unset _backup_path
-}
-## common
-export EDITOR=vim
-export PAGER=less
-## grep
-# XXX: deprecated in GNU
-export GREP_OPTIONS=--color=auto
-## histfile
-export HISTFILE=~/.histfile
-export HISTSIZE=1000
-export SAVEHIST=1000
-## python
-export PYTHONSTARTUP=~/.pythonrc
-## perl
-[[ -v commands[perl] ]] && eval $(perl -I $XDG_DATA_HOME/perl5/lib/perl5 -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null)
+# NOTE:
+# our .zprofile is expensive, so we keep track of what has been run already,
+# and only set up what is necessary. additionally, we want to ensure that our
+# environment is set up as early as possible, so we also source .zprofile in
+# .zshenv for new non-login shells.
+#
+# these issues are handled by using these methods:
+#   * the parent shell that starts the user's session after logging in to some
+#     graphical environments may not be a login shell—due to misconfiguration
+#     or otherwise—which means .zprofile is not ran and the environment is not
+#     properly configured for any child processes.
+#   * some desktop environments/graphical terminal emulators will start new
+#     terminal windows with login shells, which runs .zprofile every time and
+#     leads to noticably slow startup times.
+#   * switching users without wiping the environment will result in paths and
+#     variables intended for the old user being used for the new user. while
+#     this may be considered an edge-case that should not be supported, there
+#     are legitimate reasons to want to do this, and in any case the shell
+#     should not choke or cause unexpected problems should it happen anyway.
+
+### cleanup
+# XXX: only call after relevant vars have been set up, defined early so that
+#      below code can utilize it after they do so
+function _sev_zcleanup {
+    ## gpg forwarding
+    if [[ -d $_sev_gpg_forward_dir && ( -z $1 || $1 == 'gpg-forward' ) ]] {
+        # clean up forward dirs if its session is dead or we ask for it
+        find $_sev_gpg_forward_dir -mindepth 1 -maxdepth 1 -type d |
+          while {read -r x} {
+            # NOTE: the only way we can get here is if we have not been
+            #       forwarded before, if the user asks for it, or during
+            #       logout. if our own pid already has a dir, it is most likely
+            #       stale, the user wants it removed, or something is very
+            #       broken—in all 3 of these cases the best choice is remove it.
+            p=$(basename $x)
+            if {[[ -v _sev_gpg_forward_clean || $$ == $p ]] ||
+                ! kill -0 $p 2>/dev/null} {
+                find $x -mindepth 1 -maxdepth 1 | while {read -r y} {
+                    # XXX: real dirs will stop unlink, consider it a feature
+                    unlink $y
+                }
+                # don't force in case something important is still there
+                rmdir $x
+            }
+        }
+        # reset GNUPGHOME if we removed our own dir
+        if [[ $GNUPGHOME =~ '/.ssh_forward/\d+/*$' && ! -e $GNUPGHOME ]]
+            GNUPGHOME=${GNUPGHOME%$MATCH}
+    }
+
+    ## tmp
+    # NOTE: _sev_tmp is not unset so session dirs will not be recreated
+    # NOTE: XDG dirs that use our tmp are not unset here, they are in zlogout
+    if [[ -d $_sev_tmp && ( -z $1 || $1 == 'tmp' ) ]] {
+        # clean up tmp dirs if its session is dead or we ask for it
+        find $_sev_tmp -mindepth 1 -maxdepth 1 -name '.session.*' -type d |
+          while {read -r x} {
+            # NOTE: same rationale as above
+            p=${$(basename $x)#.session.}
+            if {[[ -v _sev_tmp_clean || $$ == $p ]] ||
+                ! kill -0 $p 2>/dev/null} {
+                rm -rf $x
+            }
+        }
+    }
+
+    unset x p y
+}
+
+### lang
+export CHARSET=${CHARSET:-UTF-8}
+export LANG=${LANG:-en_US.UTF-8}
+export LC_CTYPE=${LC_TYPE:-$LANG}
+
+### path
+# NOTE: we utilize the fact that unique arrays keep the first occurrence and
+#       remove any further occurences to capture elements from the old PATH
+#       that we did not anticipate and shift them to the front, since they are
+#       probably important to the system
+if [[ ! -v _sev_setup_path || -o login ]] {
+    typeset -U path fpath
+    # add as many generic paths as possible to keep the order we want
+    # NOTE: /usr/{local,pkg,games} are unix/bsdisms
+    # XXX: PREFIX not validated, non-posix but Termux uses it
+    syspath=("$path[@]")
+    path=(~/{s,}bin
+          {~/.local,{$PREFIX,}{,/opt,/usr{,/local,pkg}}}/sbin
+          {~/.local,{$PREFIX,}{,/opt,/usr{,/local,pkg}}}/bin
+          /usr/{X11R{7,6}/bin,games})
+    ((len=$#path))
+    path=("$path[@]" "$syspath[@]")
+    # remove nonexistent and duplicate paths
+    for (( i = 1; i <= $#path; i++ )) {
+        if [[ ! -e $path[$i] ]] {
+            path[$i]=()
+            ((i <= len)) && ((len--))
+            ((i--))
+            continue
+        }
+    }
+    # shift valid system paths to the front if there are any left
+    ((len > 0 && len < $#path)) && path=("${(@)path[len + 1, -1]}" "${(@)path[1, len]}")
+    unset syspath len i
+    # include our zsh dir in fpath. unlike above, we always prefer our paths
+    fpath=(${ZDOTDIR:-~/.zsh}/functions/{*,Completions/*}(N) "$fpath[@]")
+    # FPATH is not exported by default
+    export FPATH
+    typeset +U path fpath
+    export _sev_setup_path=
+}
+
+### tmp
+# NOTE: specs say that POSIX tmp and XDG runtime directories should exist
+#       until the last session is logged out (POSIX can exist for longer).
+#       since we can't reliably keep track of sessions in a cross-platform
+#       manner, the current implementation should use a separate directory per
+#       toplevel session (i.e. SHLVL=1). this should placate most applications,
+#       though it is not expressly spec compliant.
+if [[ ! -v _sev_tmp ]] {
+    _sev_tmp=~/tmp
+    # create personal tmp dir
+    t=${TMPDIR:-${TEMP:-${TMP:-/tmp}}}/.home-$LOGNAME
+    [[ ! -e $t ]] && mkdir -m700 $t 2>/dev/null
+    if [[ ! -d $t ]] {
+        [[ -o interactive ]] &&
+          print -P "%F{red}!!! Can't create tmpdir $t%f"
+        # fallback bare directories
+        [[ -h $_sev_tmp ]] && unlink $_sev_tmp 2>/dev/null
+        [[ ! -e $_sev_tmp ]] && mkdir -m700 $_sev_tmp 2>/dev/null
+    }
+    # link home tmp for convenience if there isn't anything meaningful there
+    [[ -h $_sev_tmp || ! -e $_sev_tmp ]] && ln -sfn $t $_sev_tmp 2>/dev/null
+    export _sev_tmp=$(realpath $_sev_tmp)
+    # ensure dir is clean
+    _sev_zcleanup tmp
+    # finally create our subdir for this session
+    h=$_sev_tmp/.session.$$
+    mkdir -m700 $h 2>/dev/null
+    export TMPDIR=$h TEMP=$h TMP=$h
+    unset t h
+}
+
+### xdg
+if [[ ! -v _sev_setup_xdg ]] {
+    # merge with any existing dirs and remove duplicates using unique arrays
+    # NOTE: include and then remove CONFIG_HOME and DATA_HOME to ensure they
+    #       are not present in the array if it was added before we got to it
+    typeset -UT XDG_CONFIG_DIRS xdg_config_dirs
+    export XDG_CONFIG_HOME=~/etc
+    mkdir $XDG_CONFIG_HOME 2>/dev/null
+    xdg_config_dirs=($XDG_CONFIG_HOME ~/.config
+      {/opt,/usr/local,/usr/pkg,}/etc/xdg
+      "${XDG_CONFIG_DIRS:+${xdg_config_dirs[@]}}")
+    export XDG_CONFIG_DIRS=${XDG_CONFIG_DIRS#$XDG_CONFIG_HOME}
+
+    typeset -UT XDG_DATA_DIRS xdg_data_dirs
+    export XDG_DATA_HOME=~/share
+    mkdir $XDG_DATA_HOME 2>/dev/null
+    xdg_data_dirs=($XDG_DATA_HOME ~/.local/share
+      /{opt,usr/local,usr/pkg,usr}/share
+      "${XDG_DATA_DIRS:+${xdg_data_dirs[@]}}")
+    export XDG_DATA_DIRS=${XDG_DATA_DIRS#$XDG_DATA_HOME}
+
+    mkdir ~/var 2>/dev/null
+    export XDG_STATE_HOME=~/var/lib
+    mkdir $XDG_STATE_HOME 2>/dev/null
+
+    if [[ -v _sev_tmp ]] {
+        export XDG_CACHE_HOME=$_sev_tmp/.xdg.cache
+        mkdir $XDG_CACHE_HOME 2>/dev/null
+
+        export XDG_RUNTIME_DIR=$TMPDIR/.xdg.runtime
+        # same as in tmpdir creation, ensure it doesn't exist
+        if [[ -h $XDG_RUNTIME_DIR ]]; then
+            unlink $XDG_RUNTIME_DIR 2>/dev/null
+        elif [[ -e $XDG_RUNTIME_DIR ]]; then
+            rm -rf $XDG_RUNTIME_DIR 2>/dev/null
+        fi
+        mkdir -m700 $XDG_RUNTIME_DIR 2>/dev/null
+    }
+
+    # source user dirs after other vars
+    [[ -e $XDG_CONFIG_HOME/user-dirs.dirs ]] &&
+      emulate sh -c "source $XDG_CONFIG_HOME/user-dirs.dirs"
+    export _sev_setup_xdg=
+}
+
+### dbus
+if [[ ! -v DBUS_SESSION_BUS_ADDRESS && -v commands[dbus-launch] ]] {
+    eval $(dbus-launch)
+    export DBUS_SESSION_BUS_ADDRESS DBUS_SESSION_BUS_PID
+}
+
+### gpg home
+if [[ ! -v GNUPGHOME ]] {
+    export GNUPGHOME=~/etc/gnupg
+    if [[ -d ~/.gnupg ]] {
+        mv ~/.gnupg ~/etc/gnupg
+    }
+}
+
+### gpg agent + forwarding
+# NOTE: while ssh manages its auth sock in its protocol when ForwardSsh is
+#       enabled, GPG must be forwarded manually over Unix socket. to support
+#       this, we forward the restricted gpg-agent extra socket to the remote
+#       host with a RemoteForward rule in ~/.ssh/config that uses the
+#       _GNUPG_SOCK_* env vars. to avoid conflicts with other ssh sessions
+#       where the same user is connecting to the same host from different
+#       machines, gpg in each environment should utilize its own forwarded
+#       socket, rather than replace the sockets in GNUPGHOME which will be
+#       overridden on the next connection. previously, you could provide a path
+#       to the agent socket in GPG_AGENT_INFO, but that was deprecated in GPG
+#       v2.1. instead, we must clone GNUPGHOME with links and replace the agent
+#       sockets there with the forwarded one.
+# NOTE: since Unix sockets are not supported under Windows, this will not work
+#       under msys, cygwin, mingw, etc., but may work under wsl2.
+# HACK: without SendEnv, which is disabled by default in most sshd configs,
+#       there is no foolproof way to prevent race conditions via filename
+#       collisions or to pass the desired forward path to the remote host
+#       environment. we just have to guess the path we choose is good on the
+#       desination, and assume the newest matching socket is the correct one
+#       after connecting. in theory, we could occlude the ssh binary on PATH
+#       with an alias or script that would allow us to communicate with the
+#       remote host before opening a shell, so that we can have the host
+#       communicate back to the client where it wants a socket created or ask
+#       the host if the path the client wants to use is writable. however, this
+#       would open up too many edge cases where it wouldn't work or be clunky
+#       (e.g. asking for password twice) to make it worth it.
+function _gpg_socketpath {
+    # dirs are percent-encoded: https://stackoverflow.com/a/64312099
+    echo ${1//(#b)%([[:xdigit:]](#c2))/${(#):-0x$match[1]}}
+}
+if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
+    export _GNUPG_SOCK_DEST_BASE=/tmp/.gpg-agent-forward
+    export _GNUPG_SOCK_DEST_EXT=$(date +%s).$RANDOM
+    export _GNUPG_SOCK_DEST=$_GNUPG_SOCK_DEST_BASE.$_GNUPG_SOCK_DEST_EXT
+    export _sev_gpg_forward_dir=${GNUPGHOME:-~/.gnupg}/.ssh_forward
+    _sev_zcleanup gpg-forward
+
+    # find our forwarded socket
+    s=($_GNUPG_SOCK_DEST_BASE*(N=oc[1]))
+    if [[ -n $s && -v SSH_CLIENT ]] {
+        # create new forward dir
+        export _sev_setup_gpg_forward=
+        h=$_sev_gpg_forward_dir/$$
+        mkdir -pm700 $h
+        # XXX: is it safe to link scdaemon socket? can its name be changed?
+        for x (S.scdaemon gpg.conf gpg-agent.conf sshcontrol random_seed
+               pubring.kbx{,~} trustdb.gpg private-keys-v1.d crls.d) {
+            ln -s ${GNUPGHOME:-~/.gnupg}/$x $h
+        }
+        export GNUPGHOME=$h
+        unset h
+        for x in $(gpgconf --list-dirs | grep 'agent-.*-\?socket:'); do
+            x=$(_gpg_socketpath ${x/#agent-*socket:})
+            if [[ ! -v orig ]] {
+                # move forwarded socket to first valid agent socket path
+                # XXX: if tmp is on different filesystem this may not work
+                mv $s $x
+                orig=$x
+            } else {
+                # make links to forwarded socket for any others
+                ln -s $orig $x
+            }
+        done
+        unset x orig
+    }
+    unset s
+
+    # what we will forward if we start a new ssh connection
+    # NOTE: do this after setting up GNUPGHOME to pick up new socket path;
+    #       if already connected over SSH, extra should be the remote one
+    export _GNUPG_SOCK_SRC=$(_gpg_socketpath \
+      $(gpgconf --list-dirs agent-extra-socket))
+} elif [[ ! -v _sev_setup_gpg_forward ]] {
+    # required for RemoteForward to not error out if the vars are unset
+    [[ ! -v _GNUPG_SOCK_SRC ]] && export _GNUPG_SOCK_SRC=/nonexistent
+    [[ ! -v _GNUPG_SOCK_DEST ]] && export _GNUPG_SOCK_DEST=/nonexistent
+}
+
+### gpg agent
+if [[ -v commands[gpg-connect-agent] && ( ! -v _sev_setup_gpgagent ||
+        ( -v _sev_first_display && -z $_sev_first_display ) ) ]] {
+    # avoid printing if we have already set up tty before
+    [[ ! -v _sev_setup_gpgagent && -o interactive ]] && p=true || p=false
+    if {$p} {
+        print -nP '%F{blue}>>>%f GPG: '
+        if [[ -v _sev_setup_gpg_forward ]] {
+            print -nP '%F{yellow}Forwarded agent '
+        } else {
+            print -nP '%F{green}Agent '
+        }
+    }
+    gpg-connect-agent /bye >/dev/null 2>&1
+    if [[ $? -ne 0 ]] {
+        $p && print -P '%F{red}communication error'
+    } else {
+        if [[ ! -v _sev_setup_gpg_forward ]] {
+            if [[ ${+GPG_TTY} -eq 0 && -o interactive ]]
+                export GPG_TTY=$(tty)
+            if [[ ( -v DISPLAY || -v WAYLAND_DISPLAY ) &&
+                  ${PINENTRY_USER_DATA/USE_TTY=0} == $PINENTRY_USER_DATA ]]
+                export PINENTRY_USER_DATA=USE_TTY=$((
+                  ${+DISPLAY} + ${+WAYLAND_DISPLAY} == 0))
+            # XXX: don't know if gpg-agent supports comments after directives
+            # XXX: path could have #
+            sed -Ei 's#^([[:space:]]*pinentry-program[[:space:]]).*$#\1'${commands[pinentry]:-/dev/null}'#' \
+              ${GNUPGHOME:-~/.gnupg}/gpg-agent.conf
+            # XXX: could check for changes before doing this to save perf
+            gpg-connect-agent RELOADAGENT UPDATESTARTUPTTY /bye >/dev/null 2>&1
+            if {$p} {
+                gpg-connect-agent /subst /serverpid \
+                  "/echo pid \${get serverpid} on $GPG_TTY" /bye 2>/dev/null
+                print -nP '%f'
+            }
+        } elif {$p} {
+            print -P '%f'
+        }
+        export _sev_setup_gpgagent=
+    }
+    unset p
+}
+
+### ssh agent
+if [[ ! -v _sev_setup_ssh ]] {
+    # NOTE: preferred order of agents to check: okcagent, gnupg, openssh
+    #       first block takes care of okcagent and openssh, second gnupg
+    # XXX: doesn't actually check if ssh is enabled in gpg
+    [[ -o interactive ]] && print -nP '%F{blue}>>>%f SSH: %F{green}'
+    if [[ ! -v SSH_AUTH_SOCK && ( -v commands[okc-ssh-agent] ||
+          ( -v commands[ssh-agent] && ! -v commands[gpg] ) ) ]] {
+        okc=${commands[okc-ssh-agent]:+okc-}
+        e=$_sev_tmp/${okc}ssh-agent-exports
+        typeset sock=
+        typeset -i pid=
+        if [[ -f $e ]] {
+            IFS=$'\0' read -r sock pid <$e
+        }
+        if [[ -S $sock && $pid > 0 ]] && kill -0 $pid; then
+            [[ -o interactive ]] && print -P "Reusing agent PID $pid%f"
+            export SSH_AUTH_SOCK=$sock
+            export SSH_AGENT_PID=$pid
+        else
+            # TODO: ensure ssh-agent path looks legit to avoid unsafe eval?
+            # XXX: doesn't appear to be any other way to handle redirection.
+            #      because eval needs to write to current scope environment
+            #      subshells can't be used to capture output and print.
+            c='TMPDIR=$_sev_tmp ${okc}ssh-agent'
+            if [[ -o interactive ]] {
+                eval $(eval $=c)
+                print -nP '%f'
+            } else {
+                eval $(eval $=c) >/dev/null 2>&1
+            }
+            echo -n $SSH_AUTH_SOCK$'\0'$SSH_AGENT_PID >!$e
+            unset c
+        fi
+        unset okc e sock pid
+    } elif [[ ! -v SSH_AUTH_SOCK && -v commands[gpg] ]] {
+        # since gpg should have been started above, just export and notify
+        if [[ -o interactive ]] {
+            if [[ -v _sev_setup_gpg_forward ]] {
+                echo 'Forwarded GPG agent'
+            } else {
+                gpg-connect-agent /subst /serverpid \
+                  '/echo GPG agent pid ${get serverpid}' /bye
+            }
+            print -nP '%f'
+        }
+        export SSH_AUTH_SOCK=$(_gpg_socketpath \
+          $(gpgconf --list-dirs agent-ssh-socket))
+    } elif [[ -v SSH_AUTH_SOCK ]] {
+        [[ -o interactive ]] && print -P 'Preconfigured agent%f'
+    } else {
+        [[ -o interactive ]] && print -P '%F{red}No agent available%f'
+    }
+
+    export _sev_setup_ssh=
+}
+unfunction _gpg_socketpath
+
+### perl local lib
+[[ -v commands[perl] && -d $XDG_DATA_HOME/perl5/lib/perl5 &&
+   ! -v PERL_LOCAL_LIB_ROOT ]] &&
+  eval $(perl -I$XDG_DATA_HOME/perl5/lib/perl5 \
+              -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null)
+
 
 ### load site-specific
 if [[ -f ~/.zprofile.local ]] { source ~/.zprofile.local }
 
-# vim: set et sts=4 sw=4 ts=8 tw=79 :
+# vim: et sts=4 sw=4 ts=8 tw=79