-## options
-setopt autocd extendedglob
-unsetopt beep
-
+### options
+setopt NO_BEEP NO_CLOBBER
+## cd
+setopt AUTO_CD CDABLE_VARS
+## completion
+setopt GLOB_COMPLETE
+## line
+setopt EXTENDED_GLOB GLOB_DOTS MARK_DIRS NOMATCH NUMERIC_GLOB_SORT
+## prompt
+setopt PROMPT_SUBST
+## jobs
+setopt AUTO_CONTINUE
## history
-setopt appendhistory
-HISTFILE=~/.histfile
-HISTSIZE=100
-SAVEHIST=100
+setopt NO_HIST_SAVE_BY_COPY HIST_IGNORE_DUPS SHARE_HISTORY HIST_REDUCE_BLANKS
-## keys
+### keys
+# TODO: investigate "^[[200~" bracketed-paste
bindkey -v
-KEYTIMEOUT=1
-# xorg
-bindkey "^[[7~" beginning-of-line #Home
-bindkey -a "^[[7~" beginning-of-line
-bindkey "^[[8~" end-of-line #End
-bindkey -a "^[[8~" end-of-line
-bindkey "^[[3~" delete-char #Del
-bindkey -a "^[[3~" delete-char
-# bsd vt
-bindkey "^[[H" beginning-of-line #Home
-bindkey -a "^[[H" beginning-of-line
-bindkey "^[[F" end-of-line #End
-bindkey -a "^[[F" end-of-line
-
+KEYTIMEOUT=10
+## populate key array
+if (( $#terminfo == 0 )) {
+ # terminfo is not set or empty
+ function find_keymap {
+ for f in ${ZDOTDIR:-$HOME}/.zkbd/${TERM}{-${DISPLAY:-${VENDOR}-${OSTYPE}},}
+ [[ -f $f ]] && keymap=$f && break
+ }
+ find_keymap
+ if [[ -z $keymap ]] {
+ if read -q "?Can't read terminfo. Add new zkbd keymap? [y/N]"; then
+ echo
+ autoload -Uz zkbd && zkbd
+ unfunction zkbd
+ find_keymap
+ fi
+ echo
+ }
+ if [[ -n $keymap ]] {
+ source $keymap
+ } else {
+ echo "Failed to source keymap file $keymap" >&2
+ }
+ unfunction find_keymap; unset keymap
+} else {
+ # activate application mode for zle so terminfo keys work
+ # NOTE: don't do this for zkbd since application mode shouldn't have been
+ # enabled by zkbd when the keymap file was generated
+ if [[ -v terminfo[smkx] && -v terminfo[rmkx] ]] {
+ autoload -Uz add-zle-hook-widget
+ function _enter-application-mode { echoti smkx }
+ add-zle-hook-widget line-init _enter-application-mode
+ function _exit-application-mode { echoti rmkx }
+ add-zle-hook-widget line-finish _exit-application-mode
+ trap _exit-application-mode EXIT
+ }
+ # match zkbd hash as best we can to terminfo
+ typeset -gA key
+ key=(F1 kf1 F2 kf2 F3 kf3 F4 kf4 F5 kf5 F6 kf6 F7 kf7 F8 kf8 F9 kf9
+ F10 kf10 F11 kf11 F12 kf12
+ Backspace kbs
+ Backtab kcbt
+ Shift-Tab kcbt
+ Insert kich1
+ Home khome
+ PageUp kpp
+ Delete kdch1
+ End kend
+ PageDown knp
+ Up kcuu1
+ Down kcud1
+ Left kcub1
+ Right kcuf1
+ )
+ for k v in ${(kv)key}; do
+ key[$k]=$terminfo[$v]
+ done; unset k v
+}
+## load history search
autoload -Uz up-line-or-beginning-search down-line-or-beginning-search
zle -N up-line-or-beginning-search
zle -N down-line-or-beginning-search
-[[ -n "$key[Up]" ]] && bindkey -- "$key[Up]" up-line-or-beginning-search
-[[ -n "$key[Down]" ]] && bindkey -- "$key[Down]" down-line-or-beginning-search
-## aliases
-alias h="history -25"
-alias j="jobs -l"
-alias l="ls -AF"
-alias ll="ls -lAFho"
-local p="ps -aSdxwwouser=USR -ogroup=GRP -opid,nice=N \
- -o%cpu,%mem,tt,stat,start=START -oetime,command | ${PAGER:-more} -Se"
-alias pa="$p"
-alias spa="sudo $p"
-unset p
-function s { sysctl hw.snd.default_unit${1:+=$1} }
-alias va="source bin/activate"
+## bind keys in both viins and vicmd modes
+typeset -A a
+a=(
+ #key viins vicmd
+ Backspace 'backward-delete-char vi-backward-char'
+ Insert 'overwrite-mode vi-insert'
+ Home 'beginning-of-line'
+ PageUp 'up-history -'
+ Delete 'delete-char'
+ End 'end-of-line'
+ PageDown 'down-history -'
+ Up 'up-line-or-beginning-search vi-up-line-or-history'
+ Down 'down-line-or-beginning-search vi-down-line-or-history'
+ Left 'backward-char'
+ Right 'forward-char'
+)
+for k v in ${(kv)a}; do
+ k=$key[$k]
+ if [[ -z "$k" ]] { continue }
+ v=($=v)
+ bindkey -- $k $v[1]
+ if [[ $v[2] == '-' ]] {
+ # copy viins to vicmd verbatim
+ bindkey -a -- $k $v[1]
+ } elif (( $#v != 1 )) {
+ # set vicmd to any other value
+ bindkey -a -- $k $v[2]
+ } else {
+ # copy viins to vicmd and prepend vi- to it
+ bindkey -a -- $k vi-$v[1]
+ }
+done
+unset a k v
+### abbreviation aliases
+alias h='history -25'
+alias j='jobs -l'
+alias l='ls -AF'
+if [[ "$OSTYPE" =~ '^(free|net)bsd' ]] {
+ alias ll='ls -lAFho'
+} else {
+ alias ll='ls -lAFh'
+}
+alias p="${PAGER:-more}" # TODO: make sure more is there or use alternate
+alias e="${EDITOR:-vi}" # TODO: make sure vi is there or use alternate
+alias se=sudoedit
# be paranoid
alias cp='cp -ip'
alias mv='mv -i'
-alias rm='rm -I'
-
-# ports
-function portpkg {
- case "$1" {
- build|run)
- sudo pkg install -AU $(make ${1}-depends-list |
- sed 's_/usr/ports/_ _' | tr -d '\n')
- ;;
- *) echo "Usage: \`portpkg <build|run>' in a port directory"
- return 1;;
- }
+if [[ "$OSTYPE" =~ '^freebsd' ]] {
+ # don't confirm if only a few files are deleted
+ alias rm='rm -I'
+} else {
+ # TODO: similar behavior for non-freebsd, or impliment in zsh
+ alias rm='rm -i'
}
-
-## prompt
-setopt prompt_subst
-PROMPT='%F{$VICOL}%n%f@%F{$VICOL}%m%f%(?../%F{red}$?%f)%# '
-RPROMPT='%F{yellow}${vcs_info_msg_0_:-%~}%f %T'
-
-function zle-line-init zle-keymap-select {
- VICOL="${${KEYMAP:/vicmd/red}:/(main|viins)/green}"
- zle reset-prompt
+## py venv
+alias va="source bin/activate"
+alias vd="deactivate"
+## ps
+source ~/bin/.check-busybox
+if which pstree >/dev/null 2>&1 && ! check-busybox pstree; then
+ # use pstree, but NOT busybox pstree because it kinda sucks
+ ps="pstree -wg3"
+elif [[ "$OSTYPE" =~ '^freebsd' ]]; then
+ ps="ps -aSdfxwwouser=USR -ogroup=GRP -opid,nice=NI \
+ -o%cpu,%mem,tty,stat,start=START -oetime,command"
+elif check-busybox ps; then
+ # busybox compatible
+ ps="ps -eouser='USR ' -ogroup='GRP ' \
+ -opid=' PID' -onice=' NI' -ovsz=' MEM' \
+ -otty,stat,etime,comm"
+else
+ # XXX: untested, posix
+ # TODO: support gnu ps
+ ps="ps -eouser=USR -ogroup=GRP -opid,nice=NI \
+ -opcpu=CPU -ovsz=MEM -otty,stat,etime,comm"
+fi
+unfunction check-busybox
+if [[ "$(basename "$PAGER")" = "less" ]] {
+ ps="$ps | less -S"
+} else {
+ ps="$ps | \"${PAGER:-more}\""
}
-zle -N zle-line-init
-zle -N zle-keymap-select
+alias pa="$ps"
+alias spa="sudo $ps"
+unset ps
-autoload -Uz vcs_info
-zstyle ':vcs_info:*' enable git
-zstyle ':vcs_info:*' get-revision true
-zstyle ':vcs_info:git*' formats "%%F{green}[%b]%m%u%c%%f %S"
-zstyle ':vcs_info:git*' actionformats "%%F{red}(%a) %%F{green}[%b]%m%u%c%%f %S"
+### specialized aliases
+## go up directories
+function up {
+ cd $(printf '../%.0s' {1..${1:-1}})
+}
+## zoxide
+[[ -v commands[zoxide] ]] && eval "$(zoxide init zsh)"
-function precmd {
- print -Pn "\e]0;%(1j,%j,)%#${SSH_CLIENT+$USER@$HOST:}%~\a"
- vcs_info
- if ((SECONDS - _exectime >= 5)) {
- # bell if exec takes 5s
- print "\a"
- }
+### hooks
+autoload -Uz add-zsh-hook
+_sev_exectime=
+function sev_preexec {
+ # change terminal title to show command
+ print -n "\e]2;$(print -P '%#')${SSH_CLIENT+$USER@$HOST:}$1\e\\"
+ # save last exec time for bell
+ # XXX: does not run for blank cmdline
+ _sev_exectime=$SECONDS
+}
+add-zsh-hook preexec sev_preexec
+function sev_precmd {
+ # change terminal title
+ # TODO: update and send BEL when job status changes
+ print -Pn "\e]2;%(1j,%j,)%#${SSH_CLIENT+$USER@$HOST:}%~\e\\"
+ # bell if exec takes 5s
+ if (( SECONDS - _sev_exectime >= 5 )) print "\a"
+ # we could update vcs_info here, but let prompt take care of it
+ # if it doesn't use vcs, it can be ignored safely
}
-function preexec {
- # change Xorg title
- print -Pnf "\e]0;%s\a" "%#${SSH_CLIENT+$USER@$HOST:}$1"
- # save last exec time
- _exectime=$SECONDS
+add-zsh-hook precmd sev_precmd
+function sev_chpwd {
+ # echo dir on cwd change
+ ls -AF
}
+add-zsh-hook chpwd sev_chpwd
-# The following lines were added by compinstall
-zstyle ':completion:*' auto-description 'specify: %d'
+### system-specific configs and aliases
+case "$OSTYPE"; in
+ freebsd*)
+ # colors
+ export CLICOLOR=
+ export LS_COLORS='di=34:ln=35:so=32:pi=33:ex=31:bd=46;34:cd=43;34:su=41;30:sg=46;30:tw=42;30:ow=43;30'
+
+ ## sound
+ function s { sysctl hw.snd.default_unit${1:+\=$1} }
+ alias vol mixer
+
+ ## install port dependencies from pkg (like pkgsrc `bmake bin-install')
+ # XXX: should probably use package-depends where possible, breaks when
+ # port name is different to package name
+ # (eg. graphics/sdl20 == sdl2, devel/glib20 == glib2, etc)
+ function portpkg {
+ case "$1" {
+ build|run)
+ sudo pkg install -AU $(make ${1}-depends-list |
+ sed 's_/usr/ports/_ _' | tr -d '\n')
+ ;;
+ *) echo "Usage: \`portpkg <build|run>' in a port directory"
+ return 1;;
+ }
+ };;
+ netbsd)
+ ## sound
+ function s {
+ if [[ -z "$1" ]] {
+ ll /dev/mixer /dev/sound /dev/audio
+ return
+ }
+ for x in mixer sound audio; do
+ ln -sf /dev/$x"$1" /dev/$x
+ done
+ }
+ function vol {
+ if [[ -z "$1" ]] {
+ for x in $(mixerctl -a | grep 'outputs\.master'); do
+ echo $x
+ done
+ return
+ }
+ mixerctl -w outputs.master"$2"="$1"
+ };;
+ *)
+ ## sound
+ # TODO: test alsa/oss/sndio/portaudio/pulse in order of importance
+ function s {}
+ function vol {}
+esac
+
+### modules & styles
+## vcs
+zstyle ':vcs_info:*' enable git
+#zstyle ':vcs_info:git*' check-for-changes true #too slow
+zstyle ':vcs_info:git*:dotfiles' check-for-changes true
+zstyle ':vcs_info:git*' check-for-staged-changes true
+autoload -Uz vcs_info
+
+## compinit
+zstyle ':completion:*' auto-description '[arg] %d'
zstyle ':completion:*' expand suffix
zstyle ':completion:*' format '# %d'
zstyle ':completion:*' group-name ''
zstyle ':completion:*' original false
zstyle ':completion:*' select-prompt '%B%l%b'
zstyle ':completion:*' verbose true
-zstyle :compinstall filename '/home/ds6/.zshrc'
+autoload -Uz compinit && compinit
+
+### prompt
+autoload -Uz promptinit && promptinit
+prompt arrows
-autoload -Uz compinit
-compinit
-# End of lines added by compinstall
+### load site-specific
+if [[ -f ~/.zshrc.local ]] { source ~/.zshrc.local }
-# vim: ts=8:sts=4:sw=4:et:tw=79
+# vim: set et sts=4 sw=4 ts=8 tw=79 :
projects / sev's projects / dotfiles.git / blobdiff