-### imports
-source ~/bin/.check-busybox
-
-### user-local fpath
-fpath=(~/.zsh ~/.zsh/functions/Prompts "${fpath[@]}")
-
### options
setopt NO_BEEP NO_CLOBBER
## cd
## jobs
setopt AUTO_CONTINUE
## history
-setopt NO_HIST_SAVE_BY_COPY HIST_IGNORE_DUPS SHARE_HISTORY
-HISTFILE=~/.histfile
-HISTSIZE=1000
-SAVEHIST=1000
+setopt NO_HIST_SAVE_BY_COPY HIST_IGNORE_DUPS SHARE_HISTORY HIST_REDUCE_BLANKS
### keys
+# TODO: investigate "^[[200~" bracketed-paste
bindkey -v
-KEYTIMEOUT=1
-## xorg
-bindkey "^[[7~" beginning-of-line #Home
-bindkey -a "^[[7~" beginning-of-line
-bindkey "^[[8~" end-of-line #End
-bindkey -a "^[[8~" end-of-line
-bindkey "^[[3~" delete-char #Del
-bindkey -a "^[[3~" delete-char
-## history search
-autoload -Uz up-line-or-beginning-search down-line-or-beginning-search && {
- if [[ -n "$key[Up]" ]] {
- zle -N up-line-or-beginning-search
- bindkey -- "$key[Up]" up-line-or-beginning-search
+KEYTIMEOUT=10
+## populate key array
+if (( $#terminfo == 0 )) {
+ # terminfo is not set or empty
+ function find_keymap {
+ for f in ${ZDOTDIR:-$HOME}/.zkbd/${TERM}{-${DISPLAY:-${VENDOR}-${OSTYPE}},}
+ [[ -f $f ]] && keymap=$f && break
}
- if [[ -n "$key[Down]" ]] {
- bindkey -- "$key[Down]" down-line-or-beginning-search
- zle -N down-line-or-beginning-search
+ find_keymap
+ if [[ -z $keymap ]] {
+ if read -q "?Can't read terminfo. Add new zkbd keymap? [y/N]"; then
+ echo
+ autoload -Uz zkbd && zkbd
+ unfunction zkbd
+ find_keymap
+ fi
+ echo
}
+ if [[ -n $keymap ]] {
+ source $keymap
+ } else {
+ echo "Failed to source keymap file $keymap" >&2
+ }
+ unfunction find_keymap; unset keymap
+} else {
+ # activate application mode for zle so terminfo keys work
+ # NOTE: don't do this for zkbd since application mode shouldn't have been
+ # enabled by zkbd when the keymap file was generated
+ if [[ -v terminfo[smkx] && -v terminfo[rmkx] ]] {
+ autoload -Uz add-zle-hook-widget
+ function _enter-application-mode { echoti smkx }
+ add-zle-hook-widget line-init _enter-application-mode
+ function _exit-application-mode { echoti rmkx }
+ add-zle-hook-widget line-finish _exit-application-mode
+ trap _exit-application-mode EXIT
+ }
+ # match zkbd hash as best we can to terminfo
+ typeset -gA key
+ key[F1]=$terminfo[kf1]
+ key[F2]=$terminfo[kf2]
+ key[F3]=$terminfo[kf3]
+ key[F4]=$terminfo[kf4]
+ key[F5]=$terminfo[kf5]
+ key[F6]=$terminfo[kf6]
+ key[F7]=$terminfo[kf7]
+ key[F8]=$terminfo[kf8]
+ key[F9]=$terminfo[kf9]
+ key[F10]=$terminfo[kf10]
+ key[F11]=$terminfo[kf11]
+ key[F12]=$terminfo[kf12]
+ key[Backspace]=$terminfo[kbs]
+ key[Insert]=$terminfo[kich1]
+ key[Home]=$terminfo[khome]
+ key[PageUp]=$terminfo[kpp]
+ key[Delete]=$terminfo[kdch1]
+ key[End]=$terminfo[kend]
+ key[PageDown]=$terminfo[knp]
+ key[Up]=$terminfo[kcuu1]
+ key[Down]=$terminfo[kcud1]
+ key[Left]=$terminfo[kcub1]
+ key[Right]=$terminfo[kcuf1]
+ #key[Menu]=$terminfo[] #TODO: not in termcap?
}
+## bind keys in both viins and vicmd modes
+function multibind {
+ local k=$key[$1]
+ if [[ -n $k ]] {
+ bindkey -- $k $2
+ if [[ -v 3 ]] {
+ # - will use same command as viins
+ bindkey -a -- $k ${3:/-/$2}
+ }
+ }
+}
+multibind Backspace backward-delete-char vi-backward-char
+multibind Insert overwrite-mode vi-insert
+multibind Home beginning-of-line -
+multibind PageUp up-line-or-history -
+multibind Delete delete-char vi-delete-char
+multibind End end-of-line -
+multibind PageDown down-line-or-history -
+multibind Left backward-char vi-backward-char
+multibind Right forward-char vi-forward-char
+## history search
+autoload -Uz up-line-or-beginning-search down-line-or-beginning-search
+zle -N up-line-or-beginning-search
+multibind Up up-line-or-beginning-search -
+zle -N down-line-or-beginning-search
+multibind Down down-line-or-beginning-search -
+unfunction multibind
+
### aliases
+## generic abbreviations
alias h="history -25"
alias j="jobs -l"
alias l="ls -AF"
-alias e="${EDITOR:-vi}" # TODO: make sure vi is there or use safe default
+alias p="${PAGER:-more}" # TODO: make sure more is there or use safe default
+alias e="${EDITOR:-vi}" # TODO: make sure vi is there or use safe default
if [[ "$OSTYPE" =~ '^(free|net)bsd' ]] {
alias ll="ls -lAFho"
} else {
alias ll="ls -lAFh"
}
alias se=sudoedit
+## be paranoid
+alias cp='cp -ip'
+alias mv='mv -i'
+if [[ "$OSTYPE" =~ '^freebsd' ]] {
+ # don't confirm if only a few files are deleted
+ alias rm='rm -I'
+} else {
+ # TODO: similar behavior for non-freebsd, or impliment in zsh
+ alias rm='rm -i'
+}
+## go up directories
+function up {
+ cd $(printf '../%.0s' {1..${1:-1}})
+}
+## py venv
+alias va="source bin/activate"
+alias vd="deactivate"
## ps
-local p=
+# source helper function
+source ~/bin/.check-busybox
if which pstree >/dev/null 2>&1 && ! check-busybox pstree; then
# use pstree, but NOT busybox pstree because it kinda sucks
- p="pstree -wg3"
+ ps="pstree -wg3"
elif [[ "$OSTYPE" =~ '^freebsd' ]]; then
- p="ps -aSdfxwwouser=USR -ogroup=GRP -opid,nice=NI \
+ ps="ps -aSdfxwwouser=USR -ogroup=GRP -opid,nice=NI \
-o%cpu,%mem,tty,stat,start=START -oetime,command"
elif check-busybox ps; then
# busybox compatible
- p="ps -eouser='USR ' -ogroup='GRP ' \
+ ps="ps -eouser='USR ' -ogroup='GRP ' \
-opid=' PID' -onice=' NI' -ovsz=' MEM' \
-otty,stat,etime,comm"
else
# XXX: untested, posix
# TODO: support gnu ps
- p="ps -eouser=USR -ogroup=GRP -opid,nice=NI \
+ ps="ps -eouser=USR -ogroup=GRP -opid,nice=NI \
-opcpu=CPU -ovsz=MEM -otty,stat,etime,comm"
fi
+unfunction check-busybox
if [[ "$(basename "$PAGER")" = "less" ]] {
- p="$p | less -SE"
+ ps="$ps | less -S"
} else {
- p="$p | \"${PAGER:-more}\""
-}
-alias pa="$p"
-alias spa="sudo $p"
-unset p
-## py venv
-alias va="source bin/activate"
-alias vd="deactivate"
-## be paranoid
-alias cp='cp -ip'
-alias mv='mv -i'
-if [[ "$OSTYPE" =~ '^freebsd' ]] {
- # don't confirm if only a few files are deleted
- alias rm='rm -I'
-} else {
- # TODO: similar behavior for non-freebsd, or impliment in zsh
- alias rm='rm -i'
-}
-## go up directories
-function up() {
- cd $(printf '../%.0s' {1..${1:-1}})
+ ps="$ps | \"${PAGER:-more}\""
}
+alias pa="$ps"
+alias spa="sudo $ps"
+unset ps
### hooks
-local _exectime=
-function precmd {
+autoload -Uz add-zsh-hook
+_sev_exectime=
+function sev_preexec {
+ # change terminal title to show command
+ print -n "\e]2;$(print -P '%#')${SSH_CLIENT+$USER@$HOST:}$1\e\\"
+ # save last exec time for bell
+ # XXX: does not run for blank cmdline
+ _sev_exectime=$SECONDS
+}
+add-zsh-hook preexec sev_preexec
+function sev_precmd {
# change terminal title
# TODO: update and send BEL when job status changes
print -Pn "\e]2;%(1j,%j,)%#${SSH_CLIENT+$USER@$HOST:}%~\e\\"
# bell if exec takes 5s
- if ((SECONDS - _exectime >= 5)) print "\a"
+ if (( SECONDS - _sev_exectime >= 5 )) print "\a"
# we could update vcs_info here, but let prompt take care of it
# if it doesn't use vcs, it can be ignored safely
}
-function preexec {
- # change terminal title to show command
- print -Pnf "\e]2;%s\e\\" "%#${SSH_CLIENT+$USER@$HOST:}$1"
- # save last exec time for bell
- # XXX: does not run for blank cmdline
- _exectime=$SECONDS
-}
-function chpwd {
+add-zsh-hook precmd sev_precmd
+function sev_chpwd {
# echo dir on cwd change
- l
+ ls -AF
}
+add-zsh-hook chpwd sev_chpwd
### system-specific configs and aliases
case "$OSTYPE"; in
freebsd*)
- ## vt binds
- bindkey "^[[H" beginning-of-line #Home
- bindkey -a "^[[H" beginning-of-line
- bindkey "^[[F" end-of-line #End
- bindkey -a "^[[F" end-of-line
+ # colors
+ export CLICOLOR=
+ export LS_COLORS='di=34:ln=35:so=32:pi=33:ex=31:bd=46;34:cd=43;34:su=41;30:sg=46;30:tw=42;30:ow=43;30'
## sound
function s { sysctl hw.snd.default_unit${1:+\=$1} }
alias vol mixer
## install port dependencies from pkg (like pkgsrc `bmake bin-install')
- #XXX: should probably use package-depends where possible, breaks when
+ # XXX: should probably use package-depends where possible, breaks when
# port name is different to package name
# (eg. graphics/sdl20 == sdl2, devel/glib20 == glib2, etc)
function portpkg {
*)
## sound
# TODO: test alsa/oss/sndio/portaudio/pulse in order of importance
- function s() {}
- function vol() {}
+ function s {}
+ function vol {}
esac
### modules & styles
## vcs
-autoload -Uz vcs_info
zstyle ':vcs_info:*' enable git
#zstyle ':vcs_info:git*' check-for-changes true #too slow
zstyle ':vcs_info:git*:dotfiles' check-for-changes true
zstyle ':vcs_info:git*' check-for-staged-changes true
+autoload -Uz vcs_info
## compinit
-# The following lines were added by compinstall
zstyle ':completion:*' auto-description '[arg] %d'
zstyle ':completion:*' expand suffix
zstyle ':completion:*' format '# %d'
zstyle ':completion:*' original false
zstyle ':completion:*' select-prompt '%B%l%b'
zstyle ':completion:*' verbose true
-zstyle :compinstall filename '/home/ds6/.zshrc'
-
-autoload -Uz compinit
-compinit
-# End of lines added by compinstall
+autoload -Uz compinit && compinit
-## prompt
-# do this last so prompt can potentially override
+### prompt
autoload -Uz promptinit && promptinit
prompt arrows
-
-### unset imports
-unfunction check-busybox
+### load site-specific
+if [[ -f ~/.zshrc.local ]] { source ~/.zshrc.local }
# vim: set et sts=4 sw=4 ts=8 tw=79 :
projects / sev's projects / dotfiles.git / blobdiff