vimrc: enable modeline explicitly

[dotfiles.git] / etc / zsh / .zprofile

diff --git a/etc/zsh/.zprofile b/etc/zsh/.zprofile
index 777e0fa87a342aa4c756091eb8d4593d7747ede9..38b34c53b445360a87f4bf8a9406dac8cec12d68 100644 (file)
--- a/etc/zsh/.zprofile
+++ b/etc/zsh/.zprofile
@@ -1,283 +1,84 @@
 # NOTE:
 # our .zprofile can be expensive, so we keep track of what has been run
 # NOTE:
 # our .zprofile can be expensive, so we keep track of what has been run

-# already, and only set up what is necessary. additionally, we want to ensure
-# that our environment is set up as early as possible, so we also source
-# .zprofile in .zshenv for new non-login shells.
+# already, and only set up what is necessary. this also allows us to re-source
+# the file to reinitialize specific parts when desired.

 #
 #

-# these issues are handled by using these methods:
-#   * the parent shell that starts the user's session after logging in to some
-#     graphical environments may not be a login shell—due to misconfiguration
-#     or otherwise—which means .zprofile is not ran and the environment is not
-#     properly configured for any child processes.
-#   * some desktop environments/graphical terminal emulators will start new
-#     terminal windows with login shells, which runs .zprofile every time and
-#     leads to noticably slow startup times.
-#   * switching users without wiping the environment will result in paths and
-#     variables intended for the old user being used for the new user. while
-#     this may be considered an edge-case that should not be supported, there
-#     are legitimate reasons to want to do this, and in any case the shell
-#     should not choke or cause unexpected problems should it happen anyway.
-
-### cleanup
-# XXX: only call after relevant vars have been set up, defined early so that
-#      below code can utilize it after they do so
-function _sev_zcleanup {
-    ## gpg forwarding
-    if [[ -d $_sev_gpg_forward_dir && ( -z $1 || $1 == 'gpg-forward' ) ]] {
-        # clean up forward dirs if its session is dead or we ask for it
-        find $_sev_gpg_forward_dir -mindepth 1 -maxdepth 1 -type d |
-          while {read -r x} {
-            # NOTE: the only way we can get here is if we have not been
-            #       forwarded before, if the user asks for it, or during
-            #       logout. if our own pid already has a dir, it is most likely
-            #       stale, the user wants it removed, or something is very
-            #       broken—in all 3 of these cases the best choice is remove it.
-            p=$(basename $x)
-            if {[[ -v _sev_gpg_forward_clean || $$ == $p ]] ||
-                    ! kill -0 $p 2>/dev/null} {
-                find $x -mindepth 1 -maxdepth 1 | while {read -r y} {
-                    # XXX: real dirs will stop unlink, consider it a feature
-                    unlink $y
-                }
-                # don't force in case something important is still there
-                rmdir $x
-            }
-        }
-        # reset GNUPGHOME if we removed our own dir
-        if [[ $GNUPGHOME =~ '/.ssh_forward/\d+/*$' && ! -e $GNUPGHOME ]]
-            GNUPGHOME=${GNUPGHOME%$MATCH}
-    }
-
-    ## tmp
-    # NOTE: _sev_tmp is not unset so session dirs will not be recreated
-    # NOTE: XDG dirs that use our tmp are not unset here, they are in zlogout
-    if [[ -d $_sev_tmp && ( -z $1 || $1 == 'tmp' ) ]] {
-        # clean up tmp dirs if its session is dead or we ask for it
-        find $_sev_tmp -mindepth 1 -maxdepth 1 -name '.session.*' -type d |
-          while {read -r x} {
-            # NOTE: same rationale as above
-            p=${$(basename $x)#.session.}
-            if {[[ -v _sev_tmp_clean || $$ == $p ]] ||
-                    ! kill -0 $p 2>/dev/null} {
-                rm -rf $x
-            }
-        }
-    }
-
-    unset x p y
-}
-
-### lang
-export CHARSET=${CHARSET:-UTF-8}
-export LANG=${LANG:-en_US.UTF-8}
+# in order to ensure future interactive environments are set up as early as
+# possible, we source this file from .zshenv for non-login shells, under some
+# specific conditions outlined there.
+#
+# this file respects non-interactive sessions and will not intentionally emit
+# output.

 
 

-### path
-# NOTE: we utilize the fact that unique arrays keep the first occurrence and
-#       remove any further occurences to capture elements from the old PATH
-#       that we did not anticipate and shift them to the front, since they are
-#       probably important to the system
+### fix path after system profile scripts have possibly mangled it

 if [[ ! -v _sev_setup_path || -o login ]] {
 if [[ ! -v _sev_setup_path || -o login ]] {

-    typeset -U path fpath
-    # add as many generic paths as possible to keep the order we want
-    # NOTE: /usr/{local,pkg,games} are unix/bsdisms
-    # XXX: PREFIX not validated, non-posix but Termux uses it, maybe others
-    # XXX: XDG specifies ~/.local/bin as the only user-writable dir for
-    #      executables, but we specify more; technically this is against spec
-    syspath=("$path[@]")
-    path=(~/{.local/,}{s,}bin
-          {~/.local,{$PREFIX,}{,/opt,/usr{,/local,pkg}}}/sbin
-          {~/.local,{$PREFIX,}{,/opt,/usr{,/local,pkg}}}/bin
-          /usr/{X11R{7,6}/bin,games})
-    ((len=$#path))
-    path=("$path[@]" "$syspath[@]")
-    # remove nonexistent and duplicate paths
-    for (( i = 1; i <= $#path; i++ )) {
-        if [[ ! -e $path[$i] ]] {
-            path[$i]=()
-            ((i <= len)) && ((len--))
-            ((i--))
-            continue
-        }
-    }
-    # shift valid system paths to the front if there are any left
-    ((len > 0 && len < $#path)) && path=("${(@)path[len + 1, -1]}" "${(@)path[1, len]}")
-    unset syspath len i
-    # include our zsh dir in fpath. unlike above, we always prefer our paths
-    fpath=(${ZDOTDIR:-~/.zsh}/functions/{*,Completions/*}(N) "$fpath[@]")
-    # FPATH is not exported by default
-    export FPATH
-    typeset +U path fpath
+    _sev_setpath

     export _sev_setup_path=
 }
 
     export _sev_setup_path=
 }
 

-### xdg local dir
-# NOTE: need this for tmp, so confirm it exists.
-# XXX: perms are not specified for XDG dirs except runtime, but I think 760
-#      makes the most sense. shouldn't break anything since no one else should
-#      be poking around in our dir.
-[[ -e ~/.local ]] || mkdir -m760 ~/.local
-
-### tmp
-# NOTE: specs say that POSIX tmp and XDG runtime directories should exist
-#       until the last session is logged out (POSIX can exist for longer).
-#       since we can't reliably keep track of sessions in a cross-platform
-#       manner, the current implementation should use a separate directory per
-#       toplevel session (i.e. SHLVL=1). this should placate most applications,
-#       though it is not expressly spec compliant.
-if [[ ! -v _sev_tmp ]] {
-    _sev_tmp=~/.local/tmp
-    # NOTE: race condition/remove in use files
-    [[ -h $_sev_tmp ]] && unlink $_sev_tmp 2>/dev/null
-    t=${TMPDIR:-${TEMP:-${TMP:-/tmp}}}/.home-$LOGNAME
-    # create personal tmp dir under system tmp
-    [[ -e $t ]] || mkdir -m700 $t 2>/dev/null
-    if [[ ! -d $t ]] {
-        [[ -o interactive ]] &&
-          print -P "%F{orange}*** Can't create TMPDIR $t, using $_sev_tmp%f"
-        # fallback bare directory
-        [[ -e $_sev_tmp ]] || mkdir -m700 $_sev_tmp 2>/dev/null
-        if [[ ! -d $_sev_tmp ]] {
-            [[ -o interactive ]] &&
-              print -P "%F{red}!!! No usable TMPDIR%f"
-            unset _sev_tmp
-        } else {
-            t=$_sev_tmp
-        }
-    } elif [[ -e $_sev_tmp ]] {
-        [[ -o interactive ]] &&
-          print -P "%F{orange}*** $_sev_tmp occluded, can't link to TMPDIR $t%f"
-        _sev_tmp=$t
-    } else {
-        ln -s $t $_sev_tmp 2>/dev/null
-    }
-    if [[ -v _sev_tmp ]] {
-        # ensure dir is clean
-        _sev_zcleanup tmp
-        # finally create our subdir for this session
-        t=$_sev_tmp/.session.$$
-        if ! mkdir -m700 $t 2>/dev/null; then
-            [[ -o interactive ]] &&
-              print -P "%F{red}!!! Can't create session subdir $t, using $_sev_tmp%f"
-            t=$_sev_tmp
-        fi
-        export _sev_tmp TMPDIR=$t TEMP=$t TMP=$t
-        unset t
-    }
-}
-
-### xdg
-if [[ ! -v _sev_setup_xdg ]] {
-    ## merge with any existing dirs and remove duplicates using unique arrays
-    # NOTE: we are accepting whatever value might be set for CONFIG and DATA;
-    #       if it wasn't set, we just use default and leave it unset
-    # NOTE: include and then remove CONFIG_HOME and DATA_HOME to ensure they
-    #       are not present in the array if it was added before we got to it
-    typeset -UT XDG_DATA_DIRS xdg_data_dirs
-    if [[ -v XDG_DATA_HOME ]] {
-        export XDG_DATA_HOME
-    } elif [[ ! -e ~/.local/share ]] {
-        mkdir -m760 ~/.local/share
-    }
-    xdg_data_dirs=($XDG_DATA_HOME /{opt,usr/local,usr/pkg,usr}/share
-      "${XDG_DATA_DIRS:+${xdg_data_dirs[@]}}")
-    # XXX: if colons are not escaped, could remove unintended part of string
-    export XDG_DATA_DIRS=${XDG_DATA_DIRS#$XDG_DATA_HOME:}
-
-    typeset -UT XDG_CONFIG_DIRS xdg_config_dirs
-    if [[ -v XDG_CONFIG_HOME ]] {
-        export XDG_CONFIG_HOME
-    } elif [[ ! -e ~/.config ]] {
-        mkdir -m760 ~/.config
-    }
-    # I am of the belief .local should follow FHS /usr/local...
-    [[ -e ~/.local/etc ]] || ln -s ~/.config ~/.local/etc
-    xdg_config_dirs=($XDG_CONFIG_HOME ${XDG_CONFIG_DIRS:+"$xdg_config_dirs[@]"}
-      {/opt,/usr/local,/usr/pkg,}/etc/xdg)
-    # XXX: if colons are not escaped, could remove unintended part of string
-    export XDG_CONFIG_DIRS=${XDG_CONFIG_DIRS#$XDG_CONFIG_HOME:}
-
-    if [[ -v XDG_STATE_HOME ]] {
-        export XDG_STATE_HOME
-    } elif [[ ! -e ~/.local/state ]] {
-        mkdir -m760 ~/.local/state
-    }
-
-    if [[ ! -v XDG_CACHE_HOME ]] {
-        if [[ -v _sev_tmp ]] {
-            export XDG_CACHE_HOME=$_sev_tmp/.xdg.cache
-            [[ -e $XDG_CACHE_HOME ]] || mkdir -m700 $XDG_CACHE_HOME
-        } elif [[ ! -e ~/.cache ]] {
-            mkdir -m700 ~/.cache
-        }
-    }
-
-    # make runtime dir in our session-specific tmpdir
-    export XDG_RUNTIME_DIR=$TMPDIR/.xdg.runtime
-    # same as in tmpdir creation, ensure dir doesn't exist
-    if [[ -h $XDG_RUNTIME_DIR ]] {
-        unlink $XDG_RUNTIME_DIR 2>/dev/null
-    } elif [[ -e $XDG_RUNTIME_DIR ]] {
-        rm -rf $XDG_RUNTIME_DIR 2>/dev/null
-    }
-    mkdir -m700 $XDG_RUNTIME_DIR 2>/dev/null
-
-    # source user dirs after other vars
-    [[ -e $XDG_CONFIG_HOME/user-dirs.dirs ]] &&
-      emulate sh -c "source $XDG_CONFIG_HOME/user-dirs.dirs"
-    export _sev_setup_xdg=
-}
-

 ### dbus
 if [[ ! -v DBUS_SESSION_BUS_ADDRESS && -v commands[dbus-launch] ]] {
     eval $(dbus-launch)
     export DBUS_SESSION_BUS_ADDRESS DBUS_SESSION_BUS_PID
 }
 
 ### dbus
 if [[ ! -v DBUS_SESSION_BUS_ADDRESS && -v commands[dbus-launch] ]] {
     eval $(dbus-launch)
     export DBUS_SESSION_BUS_ADDRESS DBUS_SESSION_BUS_PID
 }
 

-### gpg home
-if [[ ! -v GNUPGHOME ]] {
-    export GNUPGHOME=${XDG_CONFIG_HOME:-~/.config}/gnupg
-    if [[ -d ~/.gnupg ]] {
-        mv ~/.gnupg ${XDG_CONFIG_HOME:-~/.config}/gnupg
-    }
-}
-

 ### gpg agent + forwarding
 ### gpg agent + forwarding

-# NOTE: while ssh manages its auth sock in its protocol when ForwardSsh is
-#       enabled, GPG must be forwarded manually over Unix socket. to support
-#       this, we forward the restricted gpg-agent extra socket to the remote
-#       host with a RemoteForward rule in ~/.ssh/config that uses the
-#       _GNUPG_SOCK_* env vars. to avoid conflicts with other ssh sessions
-#       where the same user is connecting to the same host from different
-#       machines, gpg in each environment should utilize its own forwarded
-#       socket, rather than replace the sockets in GNUPGHOME which will be
-#       overridden on the next connection. previously, you could provide a path
-#       to the agent socket in GPG_AGENT_INFO, but that was deprecated in GPG
-#       v2.1. instead, we must clone GNUPGHOME with links and replace the agent
-#       sockets there with the forwarded one.
+# NOTE: while ssh manages its auth sock in-protocol when ForwardSsh is enabled,
+#       GPG must be forwarded manually over Unix socket. to support this, we
+#       forward the restricted gpg-agent extra socket to the remote host with a
+#       RemoteForward rule in ~/.ssh/config that uses the _GNUPG_SOCK_* vars.
+#
+#       to avoid conflicts with other ssh sessions where the same user is
+#       connecting to the same host from different machines, gpg should utilize
+#       its own forwarded socket for each session. previously, you could
+#       provide a path to the agent socket in GPG_AGENT_INFO, but that was
+#       deprecated in GPG v2.1; instead, we must replace the socket in gpg's
+#       socket dir.
+#
+#       gnupg commits fb88f37–aab8a0b moved sockets from GNUPGHOME by default
+#       to directories under /run. aab8a0b in particular solidifies the
+#       functionality shift to utilize systemd-logind's user runtime
+#       directories. if the dir isn't found, gpg will fall back to the homedir.
+#       since previous functionality allowed multiple homedirs with multiple
+#       sockets, a provision was added where changing GNUPGHOME will also
+#       change the socket dir to a hashed dir under the usual runtime dir.
+#
+#       utilizing this information, we can conclude:
+#         - on systems with user runtime dirs, changing GNUPGHOME will also
+#           give us a unique socket dir under the user runtime dir;
+#         - on other systems, the socket dir follows GNUPGHOME.
+#       therefore, the safest way to ensure unique sockets while not having to
+#       write specific logic for both scenarios is to simply change GNUPGHOME.
+#       the easiest way to do this is to create a new dir and link the contents
+#       of GNUPGHOME to the new home. we can then replace all of the agent
+#       sockets wherever they now are with the forwarded one. in either case we
+#       will be overwriting the session-specific sockets.
+#

 # NOTE: since Unix sockets are not supported under Windows, this will not work
 #       under msys, cygwin, mingw, etc., but may work under wsl2.
 # NOTE: since Unix sockets are not supported under Windows, this will not work
 #       under msys, cygwin, mingw, etc., but may work under wsl2.

+#

 # HACK: without SendEnv, which is disabled by default in most sshd configs,
 # HACK: without SendEnv, which is disabled by default in most sshd configs,

-#       there is no foolproof way to prevent race conditions via filename
-#       collisions or to pass the desired forward path to the remote host
-#       environment. we just have to guess the path we choose is good on the
-#       desination, and assume the newest matching socket is the correct one
-#       after connecting. in theory, we could occlude the ssh binary on PATH
-#       with an alias or script that would allow us to communicate with the
-#       remote host before opening a shell, so that we can have the host
+#       there is no foolproof way to prevent race conditions via socket
+#       filename collisions or to pass the desired forward path to the remote
+#       host environment. we just have to guess the path we choose is good on
+#       the desination, and assume the newest matching socket is the correct
+#       one after connecting. in theory, we could occlude the ssh binary on
+#       PATH with an alias or script that would allow us to communicate with
+#       the remote host before opening a shell, so that we can have the host

 #       communicate back to the client where it wants a socket created or ask
 #       the host if the path the client wants to use is writable. however, this
 #       would open up too many edge cases where it wouldn't work or be too
 #       clunky (e.g. asking for password twice) to make it worth it.
 function _gpg_socketpath {
     # dirs are percent-encoded: https://stackoverflow.com/a/64312099
 #       communicate back to the client where it wants a socket created or ask
 #       the host if the path the client wants to use is writable. however, this
 #       would open up too many edge cases where it wouldn't work or be too
 #       clunky (e.g. asking for password twice) to make it worth it.
 function _gpg_socketpath {
     # dirs are percent-encoded: https://stackoverflow.com/a/64312099

-    echo ${1//(#b)%([[:xdigit:]](#c2))/${(#):-0x$match[1]}}
+    echo -E - ${1//(#b)%([[:xdigit:]](#c2))/${(#):-0x$match[1]}}

 }
 if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
 }
 if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {

-    # XXX: assuming /tmo exists and is writable on destination
+    # XXX: assuming /tmp exists and is writable on destination

     export _GNUPG_SOCK_DEST_BASE=/tmp/.gpg-agent-forward
     export _GNUPG_SOCK_DEST_EXT=$(date +%s).$RANDOM
     export _GNUPG_SOCK_DEST=$_GNUPG_SOCK_DEST_BASE.$_GNUPG_SOCK_DEST_EXT
     export _GNUPG_SOCK_DEST_BASE=/tmp/.gpg-agent-forward
     export _GNUPG_SOCK_DEST_EXT=$(date +%s).$RANDOM
     export _GNUPG_SOCK_DEST=$_GNUPG_SOCK_DEST_BASE.$_GNUPG_SOCK_DEST_EXT

-    export _sev_gpg_forward_dir=${GNUPGHOME:-~/.gnupg}/.ssh_forward
+    export _sev_gpg_forward_dir=$XDG_RUNTIME_DIR/gnupg/.ssh_forward

     _sev_zcleanup gpg-forward
 
     # find our forwarded socket
     _sev_zcleanup gpg-forward
 
     # find our forwarded socket


@@ -287,8 +88,7 @@ if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
         export _sev_setup_gpg_forward=
         h=$_sev_gpg_forward_dir/$$
         mkdir -pm700 $h
         export _sev_setup_gpg_forward=
         h=$_sev_gpg_forward_dir/$$
         mkdir -pm700 $h

-        # XXX: is it safe to link scdaemon socket? can its name be changed?
-        for x (S.scdaemon gpg.conf gpg-agent.conf sshcontrol random_seed
+        for x (gpg{,-agent}.conf sshcontrol random_seed

                pubring.kbx{,~} trustdb.gpg private-keys-v1.d crls.d) {
             ln -s ${GNUPGHOME:-~/.gnupg}/$x $h
         }
                pubring.kbx{,~} trustdb.gpg private-keys-v1.d crls.d) {
             ln -s ${GNUPGHOME:-~/.gnupg}/$x $h
         }


@@ -296,17 +96,17 @@ if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
         unset h
         for x in $(gpgconf --list-dirs | grep 'agent-.*-\?socket:'); do
             x=$(_gpg_socketpath ${x/#agent-*socket:})
         unset h
         for x in $(gpgconf --list-dirs | grep 'agent-.*-\?socket:'); do
             x=$(_gpg_socketpath ${x/#agent-*socket:})

-            if [[ ! -v orig ]] {
+            if [[ ! -v primary ]] {

                 # move forwarded socket to first valid agent socket path
                 # XXX: if tmp is on different filesystem this may not work
                 mv $s $x
                 # move forwarded socket to first valid agent socket path
                 # XXX: if tmp is on different filesystem this may not work
                 mv $s $x

-                orig=$x
+                primary=$x

             } else {
                 # make links to forwarded socket for any others
             } else {
                 # make links to forwarded socket for any others

-                ln -s $orig $x
+                ln -s $primary $x

             }
         done
             }
         done

-        unset x orig
+        unset x primary

     }
     unset s
 
     }
     unset s
 


@@ -343,17 +143,15 @@ if [[ -v commands[gpg-connect-agent] &&
                 export GPG_TTY=$(tty)
             if [[ ( -v DISPLAY || -v WAYLAND_DISPLAY ) &&
                   ${PINENTRY_USER_DATA/USE_TTY=0} == $PINENTRY_USER_DATA ]]
                 export GPG_TTY=$(tty)
             if [[ ( -v DISPLAY || -v WAYLAND_DISPLAY ) &&
                   ${PINENTRY_USER_DATA/USE_TTY=0} == $PINENTRY_USER_DATA ]]

-                export PINENTRY_USER_DATA=USE_TTY=$((
-                  ${+DISPLAY} + ${+WAYLAND_DISPLAY} == 0))
-            # XXX: don't know if gpg-agent supports comments after directives
-            # XXX: path could have #
-            sed -Ei 's#^([[:space:]]*pinentry-program[[:space:]]).*$#\1'${commands[pinentry]:-/dev/null}'#' \
-              ${GNUPGHOME:-~/.gnupg}/gpg-agent.conf
+                export PINENTRY_USER_DATA=USE_TTY=0
+            # XXX: we are assuming this is our pinentry from .local/bin
+            sed -Ei 's\1f^([[:space:]]*pinentry-program[[:space:]]).*$\1f\1'$HOME'/.local/bin/pinentry\1f' \
+              ${GNUPGHOME:-~/.gnupg}/gpg-agent.conf 2>/dev/null

             # XXX: could check for changes before doing this to save perf
             gpg-connect-agent RELOADAGENT UPDATESTARTUPTTY /bye >/dev/null 2>&1
             if {$p} {
                 gpg-connect-agent /subst /serverpid \
             # XXX: could check for changes before doing this to save perf
             gpg-connect-agent RELOADAGENT UPDATESTARTUPTTY /bye >/dev/null 2>&1
             if {$p} {
                 gpg-connect-agent /subst /serverpid \

-                  "/echo pid \${get serverpid} on $GPG_TTY" /bye 2>/dev/null
+                  "/echo pid \${get serverpid} on ${WAYLAND_DISPLAY:-${DISPLAY:-$GPG_TTY}}" /bye 2>/dev/null

                 print -nP '%f'
             }
         } elif {$p} {
                 print -nP '%f'
             }
         } elif {$p} {


@@ -379,7 +177,7 @@ if [[ ! -v _sev_setup_ssh ]] {
         if [[ -f $e ]] {
             IFS=$'\0' read -r sock pid <$e
         }
         if [[ -f $e ]] {
             IFS=$'\0' read -r sock pid <$e
         }

-        if [[ -S $sock && $pid > 0 ]] && kill -0 $pid; then
+        if [[ -S $sock && $pid > 0 ]] && kill -0 $pid >/dev/null 2>&1; then

             [[ -o interactive ]] && print -P "Reusing agent PID $pid%f"
             export SSH_AUTH_SOCK=$sock
             export SSH_AGENT_PID=$pid
             [[ -o interactive ]] && print -P "Reusing agent PID $pid%f"
             export SSH_AUTH_SOCK=$sock
             export SSH_AGENT_PID=$pid


@@ -390,12 +188,13 @@ if [[ ! -v _sev_setup_ssh ]] {
             #      subshells can't be used to capture output and print.
             c='TMPDIR=$_sev_tmp ${okc}ssh-agent'
             if [[ -o interactive ]] {
             #      subshells can't be used to capture output and print.
             c='TMPDIR=$_sev_tmp ${okc}ssh-agent'
             if [[ -o interactive ]] {

+                [[ -n $okc ]] && echo -n 'OKC-'

                 eval $(eval $=c)
                 print -nP '%f'
             } else {
                 eval $(eval $=c) >/dev/null 2>&1
             }
                 eval $(eval $=c)
                 print -nP '%f'
             } else {
                 eval $(eval $=c) >/dev/null 2>&1
             }

-            echo -n $SSH_AUTH_SOCK$'\0'$SSH_AGENT_PID >!$e
+            echo -En - $SSH_AUTH_SOCK$'\0'$SSH_AGENT_PID >!$e

             unset c
         fi
         unset okc e sock pid
             unset c
         fi
         unset okc e sock pid


@@ -422,14 +221,8 @@ if [[ ! -v _sev_setup_ssh ]] {
 }
 unfunction _gpg_socketpath
 
 }
 unfunction _gpg_socketpath
 

-### perl local lib
-[[ -v commands[perl] && -d $XDG_DATA_HOME/perl5/lib/perl5 &&
-   ! -v PERL_LOCAL_LIB_ROOT ]] &&
-  eval $(perl -I$XDG_DATA_HOME/perl5/lib/perl5 \
-              -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null)
-
+### plugins
+load-plugins zprofile

 
 ### load site-specific
 
 ### load site-specific

-if [[ -f ${ZDOTDIR:-~}/.zprofile.local ]] { source ${ZDOTDIR:-~}/.zprofile.local }
-
-# vim: et sts=4 sw=4 ts=8 tw=79
+load-site-dotfile zprofile