.zprofile: small changes

[dotfiles.git] / etc / zsh / .zprofile

diff --git a/etc/zsh/.zprofile b/etc/zsh/.zprofile
index 9b93f41e22f8e4c97edcb52951fd6bd432fa7107..57c9ffc0bc5b7aca13baf5ecb0e176a1162c8982 100644 (file)
--- a/etc/zsh/.zprofile
+++ b/etc/zsh/.zprofile
@@ -1,17 +1,14 @@
 # NOTE:
 # our .zprofile can be expensive, so we keep track of what has been run
 # NOTE:
 # our .zprofile can be expensive, so we keep track of what has been run

-# already, and only set up what is necessary. additionally, we want to ensure
-# that our environment is set up as early as possible, so we also source
-# .zprofile in .zshenv for new non-login shells.
+# already, and only set up what is necessary. this also allows us to re-source
+# the file to reinitialize specific parts when desired.

 #
 #

-# these issues are handled by using these methods:
-#   * the parent shell that starts the user's session after logging in to some
-#     graphical environments may not be a login shell—due to misconfiguration
-#     or otherwise—which means .zprofile is not ran and the environment is not
-#     properly configured for any child processes.
-#   * some desktop environments/graphical terminal emulators will start new
-#     terminal windows with login shells, which runs .zprofile every time and
-#     leads to noticably slow startup times if we have not already ran it.
+# in order to ensure future interactive environments are set up as early as
+# possible, we source this file from .zshenv for non-login shells, under some
+# specific conditions outlined there.
+#
+# this file respects non-interactive sessions and will not intentionally emit
+# output.

 
 ### cleanup
 # XXX: only call after relevant vars have been set up, defined early so that
 
 ### cleanup
 # XXX: only call after relevant vars have been set up, defined early so that


@@ -62,55 +59,12 @@ function _sev_zcleanup {
     unset x p y
 }
 
     unset x p y
 }
 

-### lang
-export CHARSET=${CHARSET:-UTF-8}
-export LANG=${LANG:-en_US.UTF-8}
-
-### path
-# NOTE: we utilize the fact that unique arrays keep the first occurrence and
-#       remove any further occurences to capture elements from the old PATH
-#       that we did not anticipate and shift them to the front, since they are
-#       probably important to the system
-if [[ ! -v _sev_setup_path || -o login ]] {
-    typeset -U path fpath
-    # add as many generic paths as possible to keep the order we want
-    # NOTE: /usr/{local,pkg,games} are unix/bsdisms
-    # XXX: PREFIX not validated, non-posix but Termux uses it, maybe others
-    # XXX: XDG specifies ~/.local/bin as the only user-writable dir for
-    #      executables, but we specify more; technically this is against spec
-    syspath=("$path[@]")
-    path=(~/{.local/,}{s,}bin
-          {~/.local,{$PREFIX,}{,/opt,/usr{,/local,pkg}}}/sbin
-          {~/.local,{$PREFIX,}{,/opt,/usr{,/local,pkg}}}/bin
-          /usr/{X11R{7,6}/bin,games})
-    ((len=$#path))
-    path=("$path[@]" "$syspath[@]")
-    # remove nonexistent and duplicate paths
-    for (( i = 1; i <= $#path; i++ )) {
-        if [[ ! -e $path[$i] ]] {
-            path[$i]=()
-            ((i <= len)) && ((len--))
-            ((i--))
-            continue
-        }
-    }
-    # shift valid system paths to the front if there are any left
-    ((len > 0 && len < $#path)) && path=("${(@)path[len + 1, -1]}" "${(@)path[1, len]}")
-    unset syspath len i
-    # include our zsh dir in fpath. unlike above, we always prefer our paths
-    fpath=(${ZDOTDIR:-~/.zsh}/functions/{*,Completions/*}(N) "$fpath[@]")
-    # FPATH is not exported by default
-    export FPATH
-    typeset +U path fpath
-    export _sev_setup_path=
-}
-

 ### xdg local dir
 # NOTE: need this for tmp, so confirm it exists.
 # XXX: perms are not specified for XDG dirs except runtime, but I think 760
 #      makes the most sense. shouldn't break anything since no one else should
 #      be poking around in our dir.
 ### xdg local dir
 # NOTE: need this for tmp, so confirm it exists.
 # XXX: perms are not specified for XDG dirs except runtime, but I think 760
 #      makes the most sense. shouldn't break anything since no one else should
 #      be poking around in our dir.

-[[ -e ${_sev_home:-~}/.local ]] || mkdir -m760 ${_sev_home:-~}/.local
+[[ -e ~/.local ]] || mkdir -m760 ~/.local

 
 ### tmp
 # NOTE: specs say that POSIX tmp and XDG runtime directories should exist
 
 ### tmp
 # NOTE: specs say that POSIX tmp and XDG runtime directories should exist


@@ -118,31 +72,39 @@ if [[ ! -v _sev_setup_path || -o login ]] {
 #       since we can't reliably keep track of sessions in a cross-platform
 #       manner, the current implementation should use a separate directory per
 #       toplevel session (i.e. SHLVL=1). this should placate most applications,
 #       since we can't reliably keep track of sessions in a cross-platform
 #       manner, the current implementation should use a separate directory per
 #       toplevel session (i.e. SHLVL=1). this should placate most applications,

-#       though it is not expressly spec compliant.
+#       though it is not expressly spec compliant. this may also cause problems
+#       with disowned applications that still try to use the directories after
+#       the toplevel shell has already logged out and the dirs removed, but the
+#       chances of that are slim.

 if [[ ! -v _sev_tmp ]] {
 if [[ ! -v _sev_tmp ]] {

-    _sev_tmp=${_sev_home:-~}/.local/tmp
-    # NOTE: race condition/remove in use files
-    [[ -h $_sev_tmp ]] && unlink $_sev_tmp 2>/dev/null
-    t=${TMPDIR:-${TEMP:-${TMP:-/tmp}}}/.home-$LOGNAME
-    # create personal tmp dir under system tmp
+    # create personal TMPDIR under system tmp
+    t=${TMPDIR:-${TEMPDIR:-${TEMP:-${TMP:-/tmp}}}}/.home-$LOGNAME

     [[ -e $t ]] || mkdir -m700 $t 2>/dev/null
     [[ -e $t ]] || mkdir -m700 $t 2>/dev/null

+    _sev_tmp=~/.local/tmp

     if [[ ! -d $t ]] {
     if [[ ! -d $t ]] {

+        # fallback TMPDIR to bare local directory or existing softlink

         [[ -o interactive ]] &&
         [[ -o interactive ]] &&

-          print -P "%F{orange}*** Can't create TMPDIR $t, using $_sev_tmp%f"
-        # fallback bare directory
-        [[ -e $_sev_tmp ]] || mkdir -m700 $_sev_tmp 2>/dev/null
+          print -P "%F{orange}*** Can't create tmp dir $t, using $_sev_tmp%f"
+        [[ -h $_sev_tmp && ! -d _sev_tmp ]] && unlink $_sev_tmp 2>/dev/null
+        [[ ! -e $_sev_tmp ]] && mkdir -m700 $_sev_tmp 2>/dev/null

         if [[ ! -d $_sev_tmp ]] {
         if [[ ! -d $_sev_tmp ]] {

+            _sev_tmp=${$(mktemp 2>/dev/null):/tmp}

             [[ -o interactive ]] &&
             [[ -o interactive ]] &&

-              print -P "%F{red}!!! No usable TMPDIR%f"
-            unset _sev_tmp
-        } else {
-            t=$_sev_tmp
+              print -P "%F{red}!!! Can't create tmp dir, using $_sev_tmp%f"

         }
         }

-    } elif [[ -e $_sev_tmp ]] {
+    } elif [[ -f $_sev_tmp || ( -d $_sev_tmp && ! -h $_sev_tmp ) ]] {
+        # file or non-softlink directory is on our local dir

         [[ -o interactive ]] &&
         [[ -o interactive ]] &&

-          print -P "%F{orange}*** $_sev_tmp occluded, can't link to TMPDIR $t%f"
+          print -P "%F{orange}*** $_sev_tmp exists, can't link to tmp dir $t, ignoring it%f"

         _sev_tmp=$t
     } else {
         _sev_tmp=$t
     } else {

+        # link local dir to tmp dir
+        if [[ -h $_sev_tmp && $_sev_tmp:P != $t:P ]] {
+            [[ -o interactive ]] &&
+              print -P "%F{orange}*** $_sev_tmp links to ${_sev_tmp:P} and not ${t:P}, unlinking it%f"
+            # XXX: race condition for existing sessions still using this dir
+            unlink $_sev_tmp 2>/dev/null
+        }

         ln -s $t $_sev_tmp 2>/dev/null
     }
     if [[ -v _sev_tmp ]] {
         ln -s $t $_sev_tmp 2>/dev/null
     }
     if [[ -v _sev_tmp ]] {


@@ -152,12 +114,12 @@ if [[ ! -v _sev_tmp ]] {
         t=$_sev_tmp/.session.$$
         if ! mkdir -m700 $t 2>/dev/null; then
             [[ -o interactive ]] &&
         t=$_sev_tmp/.session.$$
         if ! mkdir -m700 $t 2>/dev/null; then
             [[ -o interactive ]] &&

-              print -P "%F{red}!!! Can't create session subdir $t, using $_sev_tmp%f"
+              print -P "%F{red}!!! Can't create session tmp subdir $t, using $_sev_tmp%f"

             t=$_sev_tmp
         fi
             t=$_sev_tmp
         fi

-        export _sev_tmp TMPDIR=$t TEMP=$t TMP=$t
-        unset t
+        export _sev_tmp TMPDIR=$t TEMPDIR=$t TEMP=$t TMP=$t

     }
     }

+    unset t

 }
 
 ### xdg
 }
 
 ### xdg


@@ -167,6 +129,14 @@ if [[ ! -v _sev_setup_xdg ]] {
     #       if it wasn't set, we just use default and leave it unset
     # NOTE: include and then remove CONFIG_HOME and DATA_HOME to ensure they
     #       are not present in the array if it was added before we got to it
     #       if it wasn't set, we just use default and leave it unset
     # NOTE: include and then remove CONFIG_HOME and DATA_HOME to ensure they
     #       are not present in the array if it was added before we got to it

+
+    # source user dirs before other vars; technically it is against spec to
+    # include any of the below dirs there, but you never know what crazy shit
+    # people will do. I rather handle them sanely with our own code than let
+    # them override after the fact.
+    [[ -e $XDG_CONFIG_HOME/user-dirs.dirs ]] &&
+      emulate sh -c "source $XDG_CONFIG_HOME/user-dirs.dirs"
+

     typeset -UT XDG_DATA_DIRS xdg_data_dirs
     if [[ -v XDG_DATA_HOME ]] {
         export XDG_DATA_HOME
     typeset -UT XDG_DATA_DIRS xdg_data_dirs
     if [[ -v XDG_DATA_HOME ]] {
         export XDG_DATA_HOME


@@ -174,8 +144,9 @@ if [[ ! -v _sev_setup_xdg ]] {
         mkdir -m760 ~/.local/share
     }
     xdg_data_dirs=($XDG_DATA_HOME /{opt,usr/local,usr/pkg,usr}/share
         mkdir -m760 ~/.local/share
     }
     xdg_data_dirs=($XDG_DATA_HOME /{opt,usr/local,usr/pkg,usr}/share

-      "${XDG_DATA_DIRS:+${xdg_data_dirs[@]}}")
+      ${XDG_DATA_DIRS:+"$xdg_data_dirs[@]"})

     # XXX: if colons are not escaped, could remove unintended part of string
     # XXX: if colons are not escaped, could remove unintended part of string

+    # TODO: remove empty element via array not scalar

     export XDG_DATA_DIRS=${XDG_DATA_DIRS#$XDG_DATA_HOME:}
 
     typeset -UT XDG_CONFIG_DIRS xdg_config_dirs
     export XDG_DATA_DIRS=${XDG_DATA_DIRS#$XDG_DATA_HOME:}
 
     typeset -UT XDG_CONFIG_DIRS xdg_config_dirs


@@ -189,6 +160,7 @@ if [[ ! -v _sev_setup_xdg ]] {
     xdg_config_dirs=($XDG_CONFIG_HOME ${XDG_CONFIG_DIRS:+"$xdg_config_dirs[@]"}
       {/opt,/usr/local,/usr/pkg,}/etc/xdg)
     # XXX: if colons are not escaped, could remove unintended part of string
     xdg_config_dirs=($XDG_CONFIG_HOME ${XDG_CONFIG_DIRS:+"$xdg_config_dirs[@]"}
       {/opt,/usr/local,/usr/pkg,}/etc/xdg)
     # XXX: if colons are not escaped, could remove unintended part of string

+    # TODO: remove empty element via array not scalar

     export XDG_CONFIG_DIRS=${XDG_CONFIG_DIRS#$XDG_CONFIG_HOME:}
 
     if [[ -v XDG_STATE_HOME ]] {
     export XDG_CONFIG_DIRS=${XDG_CONFIG_DIRS#$XDG_CONFIG_HOME:}
 
     if [[ -v XDG_STATE_HOME ]] {


@@ -197,7 +169,9 @@ if [[ ! -v _sev_setup_xdg ]] {
         mkdir -m760 ~/.local/state
     }
 
         mkdir -m760 ~/.local/state
     }
 

-    if [[ ! -v XDG_CACHE_HOME ]] {
+    if [[ -v XDG_CACHE_HOME ]] {
+        export XDG_CACHE_HOME
+    } else {

         if [[ -v _sev_tmp ]] {
             export XDG_CACHE_HOME=$_sev_tmp/.xdg.cache
             [[ -e $XDG_CACHE_HOME ]] || mkdir -m700 $XDG_CACHE_HOME
         if [[ -v _sev_tmp ]] {
             export XDG_CACHE_HOME=$_sev_tmp/.xdg.cache
             [[ -e $XDG_CACHE_HOME ]] || mkdir -m700 $XDG_CACHE_HOME


@@ -207,8 +181,12 @@ if [[ ! -v _sev_setup_xdg ]] {
     }
 
     if [[ -v XDG_RUNTIME_DIR ]] {
     }
 
     if [[ -v XDG_RUNTIME_DIR ]] {

+        # NOTE: this can be set by systemd or other pre-shell supervisor, and
+        #       if any services were started such as pipewire, we need to use
+        #       the existing runtime dir so that we can get any existing
+        #       program sockets or other data

         export XDG_RUNTIME_DIR
         export XDG_RUNTIME_DIR

-    } else {
+    } elif [[ -v TMPDIR ]] {

         # make runtime dir in our session-specific tmpdir
         export XDG_RUNTIME_DIR=$TMPDIR/.xdg.runtime
         # same as in tmpdir creation, ensure dir doesn't exist
         # make runtime dir in our session-specific tmpdir
         export XDG_RUNTIME_DIR=$TMPDIR/.xdg.runtime
         # same as in tmpdir creation, ensure dir doesn't exist


@@ -220,9 +198,6 @@ if [[ ! -v _sev_setup_xdg ]] {
         mkdir -m700 $XDG_RUNTIME_DIR 2>/dev/null
     }
 
         mkdir -m700 $XDG_RUNTIME_DIR 2>/dev/null
     }
 

-    # source user dirs after other vars
-    [[ -e $XDG_CONFIG_HOME/user-dirs.dirs ]] &&
-      emulate sh -c "source $XDG_CONFIG_HOME/user-dirs.dirs"

     export _sev_setup_xdg=
 }
 
     export _sev_setup_xdg=
 }
 


@@ -235,34 +210,54 @@ if [[ ! -v DBUS_SESSION_BUS_ADDRESS && -v commands[dbus-launch] ]] {
 ### gpg home
 if [[ ! -v GNUPGHOME ]] {
     export GNUPGHOME=${XDG_CONFIG_HOME:-~/.config}/gnupg
 ### gpg home
 if [[ ! -v GNUPGHOME ]] {
     export GNUPGHOME=${XDG_CONFIG_HOME:-~/.config}/gnupg

-    if [[ -d ~/.gnupg ]] {
-        mv ~/.gnupg ${XDG_CONFIG_HOME:-~/.config}/gnupg
+    # move existing gnupg dir to our new home
+    if [[ -d ~/.gnupg && ! -d $GNUPGHOME ]] {
+        mv ~/.gnupg $GNUPGHOME

     }
 }
 
 ### gpg agent + forwarding
     }
 }
 
 ### gpg agent + forwarding

-# NOTE: while ssh manages its auth sock in its protocol when ForwardSsh is
-#       enabled, GPG must be forwarded manually over Unix socket. to support
-#       this, we forward the restricted gpg-agent extra socket to the remote
-#       host with a RemoteForward rule in ~/.ssh/config that uses the
-#       _GNUPG_SOCK_* env vars. to avoid conflicts with other ssh sessions
-#       where the same user is connecting to the same host from different
-#       machines, gpg in each environment should utilize its own forwarded
-#       socket, rather than replace the sockets in GNUPGHOME which will be
-#       overridden on the next connection. previously, you could provide a path
-#       to the agent socket in GPG_AGENT_INFO, but that was deprecated in GPG
-#       v2.1. instead, we must clone GNUPGHOME with links and replace the agent
-#       sockets there with the forwarded one.
+# NOTE: while ssh manages its auth sock in-protocol when ForwardSsh is enabled,
+#       GPG must be forwarded manually over Unix socket. to support this, we
+#       forward the restricted gpg-agent extra socket to the remote host with a
+#       RemoteForward rule in ~/.ssh/config that uses the _GNUPG_SOCK_* vars.
+#
+#       to avoid conflicts with other ssh sessions where the same user is
+#       connecting to the same host from different machines, gpg should utilize
+#       its own forwarded socket for each session. previously, you could
+#       provide a path to the agent socket in GPG_AGENT_INFO, but that was
+#       deprecated in GPG v2.1; instead, we must replace the socket in gpg's
+#       socket dir.
+#
+#       gnupg commits fb88f37–aab8a0b moved sockets from GNUPGHOME by default
+#       to directories under /run. aab8a0b in particular solidifies the
+#       functionality shift to utilize systemd-logind's user runtime
+#       directories. if the dir isn't found, gpg will fall back to the homedir.
+#       since previous functionality allowed multiple homedirs with multiple
+#       sockets, a provision was added where changing GNUPGHOME will also
+#       change the socket dir to a hashed dir under the usual runtime dir.
+#
+#       utilizing this information, we can conclude:
+#         - on systems with user runtime dirs, changing GNUPGHOME will also
+#           give us a unique socket dir under the user runtime dir;
+#         - on other systems, the socket dir follows GNUPGHOME.
+#       therefore, the safest way to ensure unique sockets while not having to
+#       write specific logic for both scenarios is to simply change GNUPGHOME.
+#       the easiest way to do this is to create a new dir and link the contents
+#       of GNUPGHOME to the new home. we can then replace the agent sockets
+#       there with the forwarded one.
+#

 # NOTE: since Unix sockets are not supported under Windows, this will not work
 #       under msys, cygwin, mingw, etc., but may work under wsl2.
 # NOTE: since Unix sockets are not supported under Windows, this will not work
 #       under msys, cygwin, mingw, etc., but may work under wsl2.

+#

 # HACK: without SendEnv, which is disabled by default in most sshd configs,
 # HACK: without SendEnv, which is disabled by default in most sshd configs,

-#       there is no foolproof way to prevent race conditions via filename
-#       collisions or to pass the desired forward path to the remote host
-#       environment. we just have to guess the path we choose is good on the
-#       desination, and assume the newest matching socket is the correct one
-#       after connecting. in theory, we could occlude the ssh binary on PATH
-#       with an alias or script that would allow us to communicate with the
-#       remote host before opening a shell, so that we can have the host
+#       there is no foolproof way to prevent race conditions via socket
+#       filename collisions or to pass the desired forward path to the remote
+#       host environment. we just have to guess the path we choose is good on
+#       the desination, and assume the newest matching socket is the correct
+#       one after connecting. in theory, we could occlude the ssh binary on
+#       PATH with an alias or script that would allow us to communicate with
+#       the remote host before opening a shell, so that we can have the host

 #       communicate back to the client where it wants a socket created or ask
 #       the host if the path the client wants to use is writable. however, this
 #       would open up too many edge cases where it wouldn't work or be too
 #       communicate back to the client where it wants a socket created or ask
 #       the host if the path the client wants to use is writable. however, this
 #       would open up too many edge cases where it wouldn't work or be too


@@ -272,11 +267,11 @@ function _gpg_socketpath {
     echo ${1//(#b)%([[:xdigit:]](#c2))/${(#):-0x$match[1]}}
 }
 if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
     echo ${1//(#b)%([[:xdigit:]](#c2))/${(#):-0x$match[1]}}
 }
 if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {

-    # XXX: assuming /tmo exists and is writable on destination
+    # XXX: assuming /tmp exists and is writable on destination

     export _GNUPG_SOCK_DEST_BASE=/tmp/.gpg-agent-forward
     export _GNUPG_SOCK_DEST_EXT=$(date +%s).$RANDOM
     export _GNUPG_SOCK_DEST=$_GNUPG_SOCK_DEST_BASE.$_GNUPG_SOCK_DEST_EXT
     export _GNUPG_SOCK_DEST_BASE=/tmp/.gpg-agent-forward
     export _GNUPG_SOCK_DEST_EXT=$(date +%s).$RANDOM
     export _GNUPG_SOCK_DEST=$_GNUPG_SOCK_DEST_BASE.$_GNUPG_SOCK_DEST_EXT

-    export _sev_gpg_forward_dir=${GNUPGHOME:-~/.gnupg}/.ssh_forward
+    export _sev_gpg_forward_dir=$XDG_RUNTIME_DIR/gnupg/.ssh_forward

     _sev_zcleanup gpg-forward
 
     # find our forwarded socket
     _sev_zcleanup gpg-forward
 
     # find our forwarded socket


@@ -286,8 +281,7 @@ if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
         export _sev_setup_gpg_forward=
         h=$_sev_gpg_forward_dir/$$
         mkdir -pm700 $h
         export _sev_setup_gpg_forward=
         h=$_sev_gpg_forward_dir/$$
         mkdir -pm700 $h

-        # XXX: is it safe to link scdaemon socket? can its name be changed?
-        for x (S.scdaemon gpg.conf gpg-agent.conf sshcontrol random_seed
+        for x (gpg{,-agent}.conf sshcontrol random_seed

                pubring.kbx{,~} trustdb.gpg private-keys-v1.d crls.d) {
             ln -s ${GNUPGHOME:-~/.gnupg}/$x $h
         }
                pubring.kbx{,~} trustdb.gpg private-keys-v1.d crls.d) {
             ln -s ${GNUPGHOME:-~/.gnupg}/$x $h
         }


@@ -295,17 +289,17 @@ if [[ ! -v _sev_setup_gpg_forward && -v commands[gpg] ]] {
         unset h
         for x in $(gpgconf --list-dirs | grep 'agent-.*-\?socket:'); do
             x=$(_gpg_socketpath ${x/#agent-*socket:})
         unset h
         for x in $(gpgconf --list-dirs | grep 'agent-.*-\?socket:'); do
             x=$(_gpg_socketpath ${x/#agent-*socket:})

-            if [[ ! -v orig ]] {
+            if [[ ! -v primary ]] {

                 # move forwarded socket to first valid agent socket path
                 # XXX: if tmp is on different filesystem this may not work
                 mv $s $x
                 # move forwarded socket to first valid agent socket path
                 # XXX: if tmp is on different filesystem this may not work
                 mv $s $x

-                orig=$x
+                primary=$x

             } else {
                 # make links to forwarded socket for any others
             } else {
                 # make links to forwarded socket for any others

-                ln -s $orig $x
+                ln -s $primary $x

             }
         done
             }
         done

-        unset x orig
+        unset x primary

     }
     unset s
 
     }
     unset s
 


@@ -347,7 +341,7 @@ if [[ -v commands[gpg-connect-agent] &&
             # XXX: don't know if gpg-agent supports comments after directives
             # XXX: path could have #
             # XXX: we are assuming this is our pinentry from .local/bin
             # XXX: don't know if gpg-agent supports comments after directives
             # XXX: path could have #
             # XXX: we are assuming this is our pinentry from .local/bin

-            sed -Ei 's#^([[:space:]]*pinentry-program[[:space:]]).*$#\1'${commands[pinentry]:-/dev/null}'#' \
+            sed -Ei 's#^([[:space:]]*pinentry-program[[:space:]]).*$#\1'$HOME'/.local/bin/pinentry#' \

               ${GNUPGHOME:-~/.gnupg}/gpg-agent.conf 2>/dev/null
             # XXX: could check for changes before doing this to save perf
             gpg-connect-agent RELOADAGENT UPDATESTARTUPTTY /bye >/dev/null 2>&1
               ${GNUPGHOME:-~/.gnupg}/gpg-agent.conf 2>/dev/null
             # XXX: could check for changes before doing this to save perf
             gpg-connect-agent RELOADAGENT UPDATESTARTUPTTY /bye >/dev/null 2>&1


@@ -428,6 +422,5 @@ unfunction _gpg_socketpath
   eval $(perl -I$XDG_DATA_HOME/perl5/lib/perl5 \
               -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null)
 
   eval $(perl -I$XDG_DATA_HOME/perl5/lib/perl5 \
               -Mlocal::lib=$XDG_DATA_HOME/perl5 2>/dev/null)
 

-

 ### load site-specific
 ### load site-specific

-if [[ -f ${ZDOTDIR:-~}/.zprofile.local ]] { source ${ZDOTDIR:-~}/.zprofile.local }
+load-site-dotfile zprofile