[dotfiles.git] / base / .zshrc

### options
setopt NO_BEEP NO_CLOBBER
## cd
setopt AUTO_CD CDABLE_VARS
## completion
setopt GLOB_COMPLETE
## line
setopt EXTENDED_GLOB GLOB_DOTS MARK_DIRS NOMATCH NUMERIC_GLOB_SORT
## prompt
setopt PROMPT_SUBST
## jobs
setopt AUTO_CONTINUE
## history
setopt NO_HIST_SAVE_BY_COPY HIST_IGNORE_DUPS SHARE_HISTORY HIST_REDUCE_BLANKS

### keys
# TODO: investigate "^[[200~" bracketed-paste
bindkey -v
KEYTIMEOUT=10
## populate key array
if (( $#terminfo == 0 )) {
    # terminfo is not set or empty
    function find_keymap {
        for f in ${ZDOTDIR:-$HOME}/.zkbd/${TERM}{-${DISPLAY:-${VENDOR}-${OSTYPE}},}
            [[ -f $f ]] && keymap=$f && break
    }
    find_keymap
    if [[ -z $keymap ]] {
        if read -q "?Can't read terminfo. Add new zkbd keymap? [y/N]"; then
            echo
            autoload -Uz zkbd && zkbd
            unfunction zkbd
            find_keymap
        fi
        echo
    }
    if [[ -n $keymap ]] {
        source $keymap
    } else {
        echo "Failed to source keymap file $keymap" >&2
    }
    unfunction find_keymap; unset keymap
} else {
    # activate application mode for zle so terminfo keys work
    # NOTE: don't do this for zkbd since application mode shouldn't have been
    #       enabled by zkbd when the keymap file was generated
    if [[ -v terminfo[smkx] && -v terminfo[rmkx] ]] {
        autoload -Uz add-zle-hook-widget
        function _enter-application-mode { echoti smkx }
        add-zle-hook-widget line-init _enter-application-mode
        function _exit-application-mode { echoti rmkx }
        add-zle-hook-widget line-finish _exit-application-mode
        trap _exit-application-mode EXIT
    }
    # match zkbd hash as best we can to terminfo
    typeset -gA key
    key[F1]=$terminfo[kf1]
    key[F2]=$terminfo[kf2]
    key[F3]=$terminfo[kf3]
    key[F4]=$terminfo[kf4]
    key[F5]=$terminfo[kf5]
    key[F6]=$terminfo[kf6]
    key[F7]=$terminfo[kf7]
    key[F8]=$terminfo[kf8]
    key[F9]=$terminfo[kf9]
    key[F10]=$terminfo[kf10]
    key[F11]=$terminfo[kf11]
    key[F12]=$terminfo[kf12]
    key[Backspace]=$terminfo[kbs]
    key[Insert]=$terminfo[kich1]
    key[Home]=$terminfo[khome]
    key[PageUp]=$terminfo[kpp]
    key[Delete]=$terminfo[kdch1]
    key[End]=$terminfo[kend]
    key[PageDown]=$terminfo[knp]
    key[Up]=$terminfo[kcuu1]
    key[Down]=$terminfo[kcud1]
    key[Left]=$terminfo[kcub1]
    key[Right]=$terminfo[kcuf1]
    #key[Menu]=$terminfo[] #TODO: not in termcap?
}

## bind keys in both viins and vicmd modes
function multibind {
    local k=$key[$1]
    if [[ -n $k ]] {
        bindkey -- $k $2
        if [[ -v 3 ]] {
            # - will use same command as viins
            bindkey -a -- $k ${3:/-/$2}
        }
    }
}
multibind Backspace backward-delete-char vi-backward-char
multibind Insert    overwrite-mode       vi-insert
multibind Home      beginning-of-line    -
multibind PageUp    up-line-or-history   -
multibind Delete    delete-char          vi-delete-char
multibind End       end-of-line          -
multibind PageDown  down-line-or-history -
multibind Left      backward-char        vi-backward-char
multibind Right     forward-char         vi-forward-char
## history search
autoload -Uz up-line-or-beginning-search down-line-or-beginning-search
zle -N up-line-or-beginning-search
multibind Up        up-line-or-beginning-search -
zle -N down-line-or-beginning-search
multibind Down      down-line-or-beginning-search -
unfunction multibind

### aliases
## generic abbreviations
alias h="history -25"
alias j="jobs -l"
alias l="ls -AF"
alias p="${PAGER:-more}" # TODO: make sure more is there or use safe default
alias e="${EDITOR:-vi}"  # TODO: make sure vi is there or use safe default
if [[ "$OSTYPE" =~ '^(free|net)bsd' ]] {
    alias ll="ls -lAFho"
} else {
    alias ll="ls -lAFh"
}
alias se=sudoedit
## be paranoid
alias cp='cp -ip'
alias mv='mv -i'
if [[ "$OSTYPE" =~ '^freebsd' ]] {
    # don't confirm if only a few files are deleted
    alias rm='rm -I'
} else {
    # TODO: similar behavior for non-freebsd, or impliment in zsh
    alias rm='rm -i'
}
## go up directories
function up {
    cd $(printf '../%.0s' {1..${1:-1}})
}
## py venv
alias va="source bin/activate"
alias vd="deactivate"
## ps
# source helper function
source ~/bin/.check-busybox
if which pstree >/dev/null 2>&1 && ! check-busybox pstree; then
    # use pstree, but NOT busybox pstree because it kinda sucks
    ps="pstree -wg3"
elif [[ "$OSTYPE" =~ '^freebsd' ]]; then
    ps="ps -aSdfxwwouser=USR -ogroup=GRP -opid,nice=NI \
       -o%cpu,%mem,tty,stat,start=START -oetime,command"
elif check-busybox ps; then
    # busybox compatible
    ps="ps -eouser='USR     ' -ogroup='GRP     ' \
       -opid='  PID' -onice=' NI' -ovsz=' MEM' \
       -otty,stat,etime,comm"
else
    # XXX: untested, posix
    # TODO: support gnu ps
    ps="ps -eouser=USR -ogroup=GRP -opid,nice=NI \
       -opcpu=CPU -ovsz=MEM -otty,stat,etime,comm"
fi
unfunction check-busybox
if [[ "$(basename "$PAGER")" = "less" ]] {
    ps="$ps | less -SE"
} else {
    ps="$ps | \"${PAGER:-more}\""
}
alias pa="$ps"
alias spa="sudo $ps"
unset ps

### hooks
autoload -Uz add-zsh-hook
_sev_exectime=
function sev_preexec {
    # change terminal title to show command
    print -n "\e]2;$(print -P '%#')${SSH_CLIENT+$USER@$HOST:}$1\e\\"
    # save last exec time for bell
    # XXX: does not run for blank cmdline
    _sev_exectime=$SECONDS
}
add-zsh-hook preexec sev_preexec
function sev_precmd {
    # change terminal title
    # TODO: update and send BEL when job status changes
    print -Pn "\e]2;%(1j,%j,)%#${SSH_CLIENT+$USER@$HOST:}%~\e\\"
    # bell if exec takes 5s
    if (( SECONDS - _sev_exectime >= 5 )) print "\a"
    # we could update vcs_info here, but let prompt take care of it
    # if it doesn't use vcs, it can be ignored safely
}
add-zsh-hook precmd sev_precmd
function sev_chpwd {
    # echo dir on cwd change
    ls -AF
}
add-zsh-hook chpwd sev_chpwd

### system-specific configs and aliases
case "$OSTYPE"; in
    freebsd*)
        # colors
        export CLICOLOR=
        export LS_COLORS='di=34:ln=35:so=32:pi=33:ex=31:bd=46;34:cd=43;34:su=41;30:sg=46;30:tw=42;30:ow=43;30'

        ## sound
        function s { sysctl hw.snd.default_unit${1:+\=$1} }
        alias vol mixer

        ## install port dependencies from pkg (like pkgsrc `bmake bin-install')
        # XXX: should probably use package-depends where possible, breaks when
        #     port name is different to package name
        #     (eg. graphics/sdl20 == sdl2, devel/glib20 == glib2, etc)
        function portpkg {
            case "$1" {
            build|run)
                sudo pkg install -AU $(make ${1}-depends-list |
                           sed 's_/usr/ports/_ _' | tr -d '\n')
                ;;
            *)  echo "Usage: \`portpkg <build|run>' in a port directory"
                return 1;;
            }
        };;
    netbsd)
        ## sound
        function s {
            if [[ -z "$1" ]] {
                ll /dev/mixer /dev/sound /dev/audio
                return
            }
            for x in mixer sound audio; do
                ln -sf /dev/$x"$1" /dev/$x
            done
        }
        function vol {
            if [[ -z "$1" ]] {
                for x in $(mixerctl -a | grep 'outputs\.master'); do
                    echo $x
                done
                return
            }
            mixerctl -w outputs.master"$2"="$1"
        };;
    *)
        ## sound
        # TODO: test alsa/oss/sndio/portaudio/pulse in order of importance
        function s {}
        function vol {}
esac

### modules & styles
## vcs
zstyle ':vcs_info:*' enable git
#zstyle ':vcs_info:git*' check-for-changes true #too slow
zstyle ':vcs_info:git*:dotfiles' check-for-changes true
zstyle ':vcs_info:git*' check-for-staged-changes true
autoload -Uz vcs_info

## compinit
zstyle ':completion:*' auto-description '[arg] %d'
zstyle ':completion:*' expand suffix
zstyle ':completion:*' format '# %d'
zstyle ':completion:*' group-name ''
zstyle ':completion:*' ignore-parents parent
zstyle ':completion:*' insert-unambiguous false
zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
zstyle ':completion:*' list-prompt '%B%i%b'
zstyle ':completion:*' list-suffixes true
zstyle ':completion:*' matcher-list '' 'm:{[:lower:]}={[:upper:]}' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} r:|[._-]=* r:|=*' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*'
zstyle ':completion:*' menu select=1
zstyle ':completion:*' original false
zstyle ':completion:*' select-prompt '%B%l%b'
zstyle ':completion:*' verbose true
autoload -Uz compinit && compinit

### prompt
autoload -Uz promptinit && promptinit
prompt arrows

### load site-specific
if [[ -f ~/.zshrc.local ]] { source ~/.zshrc.local }

# vim: set et sts=4 sw=4 ts=8 tw=79 :
Commit	Line	Data
3c83c67b	1	### options
	2	setopt NO_BEEP NO_CLOBBER
	3	## cd
	4	setopt AUTO_CD CDABLE_VARS
	5	## completion
	6	setopt GLOB_COMPLETE
	7	## line
	8	setopt EXTENDED_GLOB GLOB_DOTS MARK_DIRS NOMATCH NUMERIC_GLOB_SORT
	9	## prompt
	10	setopt PROMPT_SUBST
	11	## jobs
	12	setopt AUTO_CONTINUE
	13	## history
73492710	14	setopt NO_HIST_SAVE_BY_COPY HIST_IGNORE_DUPS SHARE_HISTORY HIST_REDUCE_BLANKS
3c83c67b	15
	16	### keys
	17	# TODO: investigate "^[[200~" bracketed-paste
	18	bindkey -v
	19	KEYTIMEOUT=10
	20	## populate key array
	21	if (( $#terminfo == 0 )) {
	22	# terminfo is not set or empty
	23	function find_keymap {
	24	for f in ${ZDOTDIR:-$HOME}/.zkbd/${TERM}{-${DISPLAY:-${VENDOR}-${OSTYPE}},}
	25	[[ -f $f ]] && keymap=$f && break
	26	}
	27	find_keymap
	28	if [[ -z $keymap ]] {
	29	if read -q "?Can't read terminfo. Add new zkbd keymap? [y/N]"; then
	30	echo
	31	autoload -Uz zkbd && zkbd
	32	unfunction zkbd
	33	find_keymap
	34	fi
	35	echo
	36	}
	37	if [[ -n $keymap ]] {
	38	source $keymap
	39	} else {
f11fbf9e	40	echo "Failed to source keymap file $keymap" >&2
3c83c67b	41	}
	42	unfunction find_keymap; unset keymap
	43	} else {
	44	# activate application mode for zle so terminfo keys work
f11fbf9e	45	# NOTE: don't do this for zkbd since application mode shouldn't have been
f11fbf9e	46	# enabled by zkbd when the keymap file was generated
3c83c67b	47	if [[ -v terminfo[smkx] && -v terminfo[rmkx] ]] {
	48	autoload -Uz add-zle-hook-widget
	49	function _enter-application-mode { echoti smkx }
	50	add-zle-hook-widget line-init _enter-application-mode
	51	function _exit-application-mode { echoti rmkx }
	52	add-zle-hook-widget line-finish _exit-application-mode
	53	trap _exit-application-mode EXIT
	54	}
	55	# match zkbd hash as best we can to terminfo
	56	typeset -gA key
	57	key[F1]=$terminfo[kf1]
	58	key[F2]=$terminfo[kf2]
	59	key[F3]=$terminfo[kf3]
	60	key[F4]=$terminfo[kf4]
	61	key[F5]=$terminfo[kf5]
	62	key[F6]=$terminfo[kf6]
	63	key[F7]=$terminfo[kf7]
	64	key[F8]=$terminfo[kf8]
	65	key[F9]=$terminfo[kf9]
	66	key[F10]=$terminfo[kf10]
	67	key[F11]=$terminfo[kf11]
	68	key[F12]=$terminfo[kf12]
	69	key[Backspace]=$terminfo[kbs]
	70	key[Insert]=$terminfo[kich1]
	71	key[Home]=$terminfo[khome]
	72	key[PageUp]=$terminfo[kpp]
	73	key[Delete]=$terminfo[kdch1]
	74	key[End]=$terminfo[kend]
	75	key[PageDown]=$terminfo[knp]
	76	key[Up]=$terminfo[kcuu1]
	77	key[Down]=$terminfo[kcud1]
	78	key[Left]=$terminfo[kcub1]
	79	key[Right]=$terminfo[kcuf1]
	80	#key[Menu]=$terminfo[] #TODO: not in termcap?
	81	}
	82
	83	## bind keys in both viins and vicmd modes
	84	function multibind {
	85	local k=$key[$1]
	86	if [[ -n $k ]] {
	87	bindkey -- $k $2
	88	if [[ -v 3 ]] {
	89	# - will use same command as viins
	90	bindkey -a -- $k ${3:/-/$2}
	91	}
	92	}
	93	}
	94	multibind Backspace backward-delete-char vi-backward-char
	95	multibind Insert overwrite-mode vi-insert
	96	multibind Home beginning-of-line -
	97	multibind PageUp up-line-or-history -
	98	multibind Delete delete-char vi-delete-char
	99	multibind End end-of-line -
	100	multibind PageDown down-line-or-history -
	101	multibind Left backward-char vi-backward-char
	102	multibind Right forward-char vi-forward-char
	103	## history search
	104	autoload -Uz up-line-or-beginning-search down-line-or-beginning-search
	105	zle -N up-line-or-beginning-search
	106	multibind Up up-line-or-beginning-search -
	107	zle -N down-line-or-beginning-search
	108	multibind Down down-line-or-beginning-search -
	109	unfunction multibind
	110
111	### aliases
112	## generic abbreviations
113	alias h="history -25"
114	alias j="jobs -l"
115	alias l="ls -AF"
116	alias p="${PAGER:-more}" # TODO: make sure more is there or use safe default
117	alias e="${EDITOR:-vi}" # TODO: make sure vi is there or use safe default
118	if [[ "$OSTYPE" =~ '^(free\|net)bsd' ]] {
119	alias ll="ls -lAFho"
120	} else {
121	alias ll="ls -lAFh"
122	}
123	alias se=sudoedit
124	## be paranoid
125	alias cp='cp -ip'
126	alias mv='mv -i'
127	if [[ "$OSTYPE" =~ '^freebsd' ]] {
128	# don't confirm if only a few files are deleted
129	alias rm='rm -I'
130	} else {
131	# TODO: similar behavior for non-freebsd, or impliment in zsh
132	alias rm='rm -i'
133	}
134	## go up directories
135	function up {
136	cd $(printf '../%.0s' {1..${1:-1}})
137	}
138	## py venv
139	alias va="source bin/activate"
140	alias vd="deactivate"
141	## ps
142	# source helper function
143	source ~/bin/.check-busybox
144	if which pstree >/dev/null 2>&1 && ! check-busybox pstree; then
145	# use pstree, but NOT busybox pstree because it kinda sucks
146	ps="pstree -wg3"
147	elif [[ "$OSTYPE" =~ '^freebsd' ]]; then
148	ps="ps -aSdfxwwouser=USR -ogroup=GRP -opid,nice=NI \
149	-o%cpu,%mem,tty,stat,start=START -oetime,command"
150	elif check-busybox ps; then
151	# busybox compatible
152	ps="ps -eouser='USR ' -ogroup='GRP ' \
153	-opid=' PID' -onice=' NI' -ovsz=' MEM' \
154	-otty,stat,etime,comm"
155	else
156	# XXX: untested, posix
157	# TODO: support gnu ps
158	ps="ps -eouser=USR -ogroup=GRP -opid,nice=NI \
159	-opcpu=CPU -ovsz=MEM -otty,stat,etime,comm"
160	fi
161	unfunction check-busybox
162	if [[ "$(basename "$PAGER")" = "less" ]] {
163	ps="$ps \| less -SE"
164	} else {
165	ps="$ps \| \"${PAGER:-more}\""
166	}
167	alias pa="$ps"
168	alias spa="sudo $ps"
169	unset ps
170
171	### hooks
172	autoload -Uz add-zsh-hook
173	_sev_exectime=
174	function sev_preexec {
175	# change terminal title to show command
176	print -n "\e]2;$(print -P '%#')${SSH_CLIENT+$USER@$HOST:}$1\e\\"
177	# save last exec time for bell
178	# XXX: does not run for blank cmdline
179	_sev_exectime=$SECONDS
180	}
181	add-zsh-hook preexec sev_preexec
182	function sev_precmd {
183	# change terminal title
184	# TODO: update and send BEL when job status changes
185	print -Pn "\e]2;%(1j,%j,)%#${SSH_CLIENT+$USER@$HOST:}%~\e\\"
186	# bell if exec takes 5s
187	if (( SECONDS - _sev_exectime >= 5 )) print "\a"
188	# we could update vcs_info here, but let prompt take care of it
189	# if it doesn't use vcs, it can be ignored safely
190	}
191	add-zsh-hook precmd sev_precmd
192	function sev_chpwd {
193	# echo dir on cwd change
194	ls -AF
195	}
196	add-zsh-hook chpwd sev_chpwd
197
198	### system-specific configs and aliases
199	case "$OSTYPE"; in
200	freebsd*)
201	# colors
202	export CLICOLOR=
203	export LS_COLORS='di=34:ln=35:so=32:pi=33:ex=31:bd=46;34:cd=43;34:su=41;30:sg=46;30:tw=42;30:ow=43;30'
204
205	## sound
206	function s { sysctl hw.snd.default_unit${1:+\=$1} }
207	alias vol mixer
208
209	## install port dependencies from pkg (like pkgsrc `bmake bin-install')
210	# XXX: should probably use package-depends where possible, breaks when
211	# port name is different to package name
212	# (eg. graphics/sdl20 == sdl2, devel/glib20 == glib2, etc)
213	function portpkg {
214	case "$1" {
215	build\|run)
216	sudo pkg install -AU $(make ${1}-depends-list \|
217	sed 's_/usr/ports/_ _' \| tr -d '\n')
218	;;
219	*) echo "Usage: \`portpkg <build\|run>' in a port directory"
220	return 1;;
221	}
222	};;
223	netbsd)
224	## sound
225	function s {
226	if [[ -z "$1" ]] {
227	ll /dev/mixer /dev/sound /dev/audio
228	return
229	}
230	for x in mixer sound audio; do
231	ln -sf /dev/$x"$1" /dev/$x
232	done
233	}
234	function vol {
235	if [[ -z "$1" ]] {
236	for x in $(mixerctl -a \| grep 'outputs\.master'); do
237	echo $x
238	done
239	return
240	}
241	mixerctl -w outputs.master"$2"="$1"
242	};;
243	*)
244	## sound
245	# TODO: test alsa/oss/sndio/portaudio/pulse in order of importance
246	function s {}
247	function vol {}
248	esac
249
250	### modules & styles
251	## vcs
252	zstyle ':vcs_info:*' enable git
253	#zstyle ':vcs_info:git*' check-for-changes true #too slow
254	zstyle ':vcs_info:git*:dotfiles' check-for-changes true
255	zstyle ':vcs_info:git*' check-for-staged-changes true
256	autoload -Uz vcs_info
257
258	## compinit
259	zstyle ':completion:*' auto-description '[arg] %d'
260	zstyle ':completion:*' expand suffix
261	zstyle ':completion:*' format '# %d'
262	zstyle ':completion:*' group-name ''
263	zstyle ':completion:*' ignore-parents parent
264	zstyle ':completion:*' insert-unambiguous false
265	zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
266	zstyle ':completion:*' list-prompt '%B%i%b'
267	zstyle ':completion:*' list-suffixes true
268	zstyle ':completion:' matcher-list '' 'm:{[:lower:]}={[:upper:]}' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} r:\|[._-]= r:\|=' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:\|= r:\|=*'
269	zstyle ':completion:*' menu select=1
270	zstyle ':completion:*' original false
271	zstyle ':completion:*' select-prompt '%B%l%b'
272	zstyle ':completion:*' verbose true
273	autoload -Uz compinit && compinit
274
275	### prompt
276	autoload -Uz promptinit && promptinit
277	prompt arrows
278
81c3957e	279	### load site-specific
81c3957e	280	if [[ -f ~/.zshrc.local ]] { source ~/.zshrc.local }
b3de8395	281
1f53b630	282	# vim: set et sts=4 sw=4 ts=8 tw=79 :